Delfield 8118-EF Specifications

LiquiTec ™ Drop-In Self-Contained Eutectic Fluid Refrigerated Cold Pans
Short Form

Specifications

General Definition: LiquiTec ™
Cold Pans with Eutectic Fluid
technology allows food in food
pans to be flush with top
of counter. Cold pan meets
NSF standard 7; and can be
dropped into Delfield Mark 7,
Shelleyglas ® or Shelleysteel ™
counters or existing counters.
Top: is one-piece 18-gauge
stainless steel, with .62" (1.57cm)
overhang around perimeter and
die stamped 19.87" x 11.87"
(50.5cm x 30.2cm) openings
with depressed edges. Formed
well below each opening is
6.25" (15.9cm) deep with .5"drain
manifold to gate valve. Each
well, flush with the top, for flush
mount pans to accommodate
12" x 20" (30.5cm x 50.8cm)
pans 4" (7.6cm) or 6" (15.2cm)
deep supplied by others. Product
temperatures of 33°F (1°C) to
41°F (5°C) are maintained at
86°F (30°C) ambient room
temperature, meeting NSF 7
requirements.
Sides and bottom: are
insulated with high-density
closed-cell polyurethane.
Exterior housing is 22-gauge
galvanized steel.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Refrigeration: system uses
HFC-404A refrigerant. Eutectic
fluid is used as the heat transfer
medium. Condensing unit is
suspended below the cold pan
on a 16-gauge steel frame.
Temperature control has an OFF
position to shut down the cold
pan. Unit is supplied with
expansion valve.
A stainless steel louver is
provided for field installation;
cutout dimension is 11" x 22"
(27.94cm x 55.88cm). A second
opening 11" x 22" (27.94cm x
55.88cm) at the rear of the
cabinet should be provided at
installation to allow for proper air
circulation.
Electrical system is 115/60c/1ph
with NEMA 5-15P plug.
Optional Accessories
and Modifications:
• Single or double service flip-up
sneezeguards
• Relocate compressor
• Remote refrigeration
(specify refrigerant)
PROJECT _____________________________________
ITEM NUMBER_________________________________
QUANTITY _______________ DATE________________
APPROVAL____________________________________
Model 8186-EF
8100-EF