Download Print this page

a/d/s/ CM250LCR Owner's Manual

Compact monitor speaker system

Advertisement

Quick Links

CM50
CM60
CM250LCR
owner's manual
analog and digital systems

Advertisement

loading

Summary of Contents for a/d/s/ CM250LCR

  • Page 1 CM50 CM60 CM250LCR owner's manual analog and digital systems...
  • Page 2: Table Of Contents

    table of contents introduction ........... . .2 cautions .
  • Page 3: Speaker Placement

    The CM250LCR may be placed either above or below a video monitor when using a direct view or rear projection set. The CM250LCR may also be used by positioning it vertically, which is the recommended orientation for optimum horizontal dispersion. With front projection video monitors, the center channel is commonly placed below the screen.
  • Page 4: Connections

    connections wire Use two-conductor stranded-type, insulated wire to connect the speakers to the amplifier. There are many types of high performance wire available for speaker connection. Your authorized a/d/s/ dealer can recommend appropriate wire. If you want, standard "lamp" wire or "zip cord" can be used. Use 16 gauge for runs less than 50 feet, and use 14 gauge or larger, for longer runs.
  • Page 5: Troubleshooting

    troubleshooting Most difficulties with high fidelity audio equipment results from loose connections, bad connecting cables or improperly set switches. No sound It is rare for a speaker to fail completely. When there is no sound, check all the speaker wire connections and electronic equipment settings. Dull or muted sound Operating the speakers at an unsafe power level can damage the speakers.
  • Page 6: Specifications

    CM60 driver complement enclosure type enclosure material frequency response impedance crossover sensitivity amplifier power dimensions CM250LCR driver complement enclosure type enclosure material frequency response impedance crossover sensitivity amplifier power dimensions *Tested under laboratory conditions (Specifications subject to change without notice) 5 1/4"...
  • Page 7: Warranty Information

    ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. declaration of conformity manufacturer name: Directed Electronics Inc. manufacturer address: One Viper Way Vista, California 92081 declares, that the product: product name: CM50, CM60, CM250LCR conforms to the following standards: EN55013 EN55020...
  • Page 8 © 2004 Directed Electronics, Inc. All rights reserved G397750/55/60 10-04...

This manual is also suitable for:

Cm60Cm50