Advertisement
Quick Links
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don't
hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage.
The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply. Please ensure the finished wall
is straight and plumb and the floor is flat and perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver
ROUGH-IN DIMENSIONS
5-1/2"
(140mm)
FLOOR
TM
BR-BLOX-20XX
Level
BR-BLOX-12XX
SH-BLOX-20XX
X
SUGGESTED HEIGHT:
Undermount
INSTALLATION INSTRUCTIONS
BR-BLOX-12XX
Drill
Tape Measure
Model #
X (inch)
12"
20"
21-1/2" (546mm)
Application
Y (inch)
28.5"
Vessel
25.5"
BLOX
BR-BLOX-xxXX
10'
Safety Glasses
FINISHED
Y (inch)
TM
BRIDGE
WALL
Advertisement
Summary of Contents for Xylem BLOX BRIDGE BR-BLOX-12 Series
- Page 1 BR-BLOX-20XX BR-BLOX-12XX THANK YOU FOR CHOOSING XYLEM Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage.
- Page 2 • Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish. Please note that some chemicals may damage the finish. Rev 2/10 For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...