1. Product introduction UPS power supplies in this series provide comprehensive protection against overvoltage and voltage spikes as well as against high power density. Thanks to the built-in voltage stabilizer, the UPS can continue to work online and provide stable power when voltage fluctuations. The built-in microprocessor driver ensures high reliability. Product overview Front view: Switch...
Connection to utility power and charging Plug in the AC input power cord to the wall outlet. For the best results, it is suggested to charge the battery for at least 6 hours before initial use. The UPS charges its batteries while connecting to the utility. Connect the loads Plug in loads to output receptacles on the rear panel of the UPS, then connected devices are protected.
Caution! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages or any other liquid-containing vessels on or near the UPS. Caution! In the event of any emergency, press the off button and disconnect the power cord from the AC power supply to properly disable UPS.
Size mm (W x H x D) 297 x 101 x 142 Weight 3.7 kg 4.2 kg 4.9 kg 4.9 kg Humidity / temperature 0-95% / 0-40 C (non-condensing) Noise level Less than 40dB Producer: ntec Ul. Chorzowska 44B 44-100 Gliwice Poland www.qoltec.com...