Summary of Contents for Price LFD
- Page 1 MANUAL – INSTALLATION & MOUNTING Critical Environments Diffusers LFD, LFDC, FFU, PURAFLO, RFD, RFDC, FRFD, FRFDC, AMDC, HCF, RAVD, RVDC v001 – Issue Date: 08/31/21 © 2021 Price Industries Limited. All rights reserved.
-
Page 2: Table Of Contents
CritiCal EnvironmEnts DiffusErs TABLE OF CONTENTS Product Overview Before You Start ............1 Required Tools/Parts ............ 1 Installation & Mounting Instructions Getting Started .............. 2 T-Bar Mounting ............. 3 Surface Mounting ............4... -
Page 3: Product Overview
The filters supplied by Price have been 100% tested and certified by the manufacturer to be free of defects and leaks. Price cannot accept responsibility for damage that occurs after shipment, whether through transit, handling or installation, and will not replace filters under Price standard warranty. -
Page 4: Getting Started
Step 1: Remove Diffuser from shipping carton and inspect for any damage. If product is found to be damaged please contact your local Price representative. Step 2: Determine if the diffuser construction is the flanged or the non- flanged style. Typically, non-filtered... -
Page 5: T-Bar Mounting
CritiCal EnvironmEnts DiffusErs INSTALLATION & MOUNTING NSTRUCTIONS t-Bar mounting fiGurE 2: laY tHE DiffusEr on tHE t-Bar to mount Step 4: Ensure product size is consistent with grid module size. Step 5: Lay the Diffuser on the T-bar so that all 4 sides are resting evenly on the grid. -
Page 6: Surface Mounting
CritiCal EnvironmEnts DiffusErs INSTALLATION & MOUNTING NSTRUCTIONS surface mounting fiGurE 4: install tHE flanGED DiffusEr in tHE oPEninG anD fastEn sECurElY Step 4: If the diffuser contains a flange, it can be installed either directly into the ceiling opening or through the use of a mounting frame (HGMF). - Page 7 CritiCal EnvironmEnts DiffusErs INSTALLATION & MOUNTING NSTRUCTIONS Hospital Grade Mounting fiGurE 5: HGmf installED usinG HanGEr WirEs Frame (HGMF) Step 5: Create ceiling opening consistent with the size of the mounting frame. Refer to the product submittal the appropriate opening size. Step 6: The HGMF can be fastened directly to framing or suspended from hanger wires using the pre-punched...
- Page 8 This document contains the most current product information as of this printing. For the most up-to-date product information, please go to priceindustries.com © 2021 Price Industries Limited. All rights reserved.