Gainsborough H582 WW Assembly Instructions

200 LED WARM WHITE/MULTICOLOURED
H582 WW/MC
v001: 26/03/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
This product consists of a solar cell, rechargeable battery and LED light. During the day, sunlight charges the
battery. At night, the energy stored in the battery is used to power the light. No other power or connections
are required. The length of time the light will stay on for depends on how much sunlight has been received
during the day.
The solar panel should be located where sunlight can fall directly on it – avoid shadows from buildings, trees,
walls, hedges and similar objects, as these will reduce performance.
Please read and follow all instructions before operating your lights. Save this manual for future reference.
BEFORE FIRST USE: Remove the protective film from the solar panel.
CHARGING AND OPERATION:
1. Set switch (located on the back of solar case) to "ON" position. Charge the solar product by placing it
under direct sunlight for at least 8 hours.
2. The light will work automatically. It will automatically charge under direct sunlight during the day
time and illuminate at night.
3. This solar lights has "Flashing" function as well. Turn switch to "ON" position and press "MODE"
button you can achieve the " FLASHING" function.
NOTE: In order to verify that the switch is correctly in the "ON" position, cover the solar panel with your
hand and the light should turn on automatically.
IMPORTANT:
1. Install the solar product in an area where it can get direct sunlight.
2. Leave the switch to "ON" position.
ALWAYS POSITION IN DIRECT SUNLIGHT
Total length: 21.9m
Battery 1 pc AA 1.2v 800Mah, Ni-MH,
Rechargeable (included)
H582 WW 200 LED Warm White
H582 MC 200 LED Multicolour