cardiojump AirTrack Operating Instructions

Operating Instructions
Art.-Nr. CJ-AT-A
Air Track
Operation
⚠ CAUTION
®
If parts of the scope of delivery are missing or damaged, the device
must not be used.
Inflate
1. Spread out the mat completely at the desired location. Make sure that
there is enough space around the mat.
2. Connect the pump to the mat.
3. Turn on the pump.
⚠ WARNING
Let air into the mat until the desired strength is achieved. However,
remember not to "overfill" the mat, as this can cause damage to the
article and personal injury.
4. Disconnect the air pump from the mat.
CJATA.01.01
5. Close the valve of the mat.
Deflate
1. Connect the pump to the mat.
2. Adjust the controller of the pump accordingly.
3. Switch on the pump.
4. Put the mat back together after all the air has escaped and close the
valve.
5. Pack the mat in the supplied carton.
Description
An AirTrack is a mat that is filled with air. It is made of robust and durable
materials and has various applications. This mat has many advantages
compared to conventional floor runners or other gym mats. Unlike
inflatables, AirTracks are filled with air only once and are then ready for
use. There is no need to have a fan on all the time and you don't have to
refill air every few minutes.
General Safety Instructions
+ Children should not be allowed unattended near the device and the
pump.
+ The pump may only be connected directly to a grounded power outlet
using the power cable supplied. Extension cables must comply with
VDE guidelines. Always unwind the power cord completely.
+ The power outlet must be protected by a fuse with a minimum fuse
rating of "16 Ampere".
+ Do not change anything at the power cable or the power plug.
+ Keep the pump and the power cord away from water, heat, oil and
sharp edges.