QUALITY GUARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturers warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
DECLARATION OF CONFORMITY
E C MACHINERY DIRECTIVE 2006/42/EC
We hereby certify that KENNEDY Trolley Jacks
Models T556 & T1056
comply with all the relevant provisions of the EC Directive 2006/42/EC
(The Machinery Directive of the Council of European Communities)
Harmonised Standards Applied: prEN 1494:1994
National Standards Applied: DIN 76024 01.84
KENNEDY TOOLS
Manufactured for
Wigston Works, Leicester, England, LE18 2FS.
www.kennedy-tools.co.uk
Signed:
Date: 14th October 2014
Name: Keith Read
Position: HSQE Manager.
AVAILABLE FROM YOUR DISTRIBUTOR
© The Kennedy Group Ltd. 06/2014
TROLLEY JACK
MODEL T556
5
KEN-503-6380K
TONNE
For heavy duty use
Constructed from heavy gauge steel
Automatic safety overload protection
Handle tilts and locks in three positions
Foot pedal pump and fine adjustment on handle for optimum vehicle height
Extra long handle for easy access under bigger vehicles
Handle mounted safety release prevents accidental lowering of the load
Large diameter saddle for a secure hold under the jacking point
Rear toe plate for easy positioning
INSTRUCTION MANUAL
www.kennedy-tools.co.uk
MODEL T1056
10
KEN-503-6420K
TONNE