Taiden HCS-5300T Series Quick Reference Card Of Installation

Ceiling mounted
(HCS-5300TD&HCS-5300TH)
/ For sprung roof
φ98mm
/ For hard ceiling
5 30mm
Please read safety instructions in installation and operating manual on CD before using the system. For any other resources, please visit our website: www.taiden.com.
Quick Reference Card of Installation | HCS-5300T Series Transceiver
，
Drill a mounting hole into the ceiling, insert the
cable and spring into the hole until the base of
the transceiver can fit with the ceiling
Hold the spring straightly and vertically
Install the ceiling mounting kit at the top of the
transceiver
，
Put the slots of the transceiver into the mounting
bracket and fix it with clockwise rotation
Drill two holes according to the position and put
the included rubber plugs into, then fix the
mounting bracket on the ceiling with M3 screws
Tripod mounted
(HCS-5300TD&HCS-5300TH)
/ For a
Stator
Hole
Flexible tube
bracket
M3
M3 screw
M3
Install the transceiver and
the stator at the ends of the
flexible tube bracket
/ For f
Mounting bracket
Hole
， M3
Put the mounting bracket on
the button of the transceiver
and fix it with rotation
，
| HCS-5300T
djustable angle
Fixed screw
(
Tripod (height adjustable)
,
Aim the hole of the stator to the
fixed screw and fix it with
clockwise rotation
ixed angle
Fixed screw
(
Tripod (height adjustable)
,
Aim the hole of the mounting
bracket to the fixed screw and
fix it with clockwise rotation
。
)
)
， ： 。
www.taiden.com