Advertisement
Quick Links
Santorini
ST-BL1584U
Farmhouse Undermount Sink
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSON
The latest technological advances are used in the
manufacturing process of our sinks which are tested a
number of times during the production process to ensure
they comply with rigorous quality standards.
Manufactured from 80% granite and 20% quartz and
resin, the sink is scratch, heat and stain resistant.
This sink can be installed on virtually any type of
benchtop, including wood, plastic, marble, etc.
Correct and proper use of your sink will ensure its
long-lasting life. Consult the Care and Maintenance
section of this manual for advice on cleaning and
regular maintenance.
PLEASE NOTE
If a washing machine or dishwasher is going to be
installed beneath the sink, proceed as follows:
• To prevent overheating, which may result in the
deformation of the sink, adjust the feet on the washing
machine / dishwasher so there is sufficient ventilation
between the appliance and the sink.
• To facilitate air circulation and cooling, we recommend
providing the cabinet base with ventilation slots.
Installation Instructions
STOP AND READ CAREFULLY
PRE-INSTALLATION CHECKS
Unpack & check the item is correct and no
damage has occurred during transit.
If there are any visible defects, DO NOT
PROCEED WITH THE INSTALLATION and
please contact the place of purchase
immediately.
ANY CLAIMS FOR DAMAGE WILL NOT BE
ACCEPTED AFTER INSTALLATION.
Protect your sink before and during
installation. Scratches, cracks or other
surface damage sustained during or after
the installation are NOT COVERED BY
WARRANTY.
Installation must be in accordance with
building regulations and any local
authority requirements.
CAUTION: Composite Sinks are HEAVY, be
sure to get help when lifting or moving.
TF29a – ST-BL1584U Installation Instructions / June 2021 / Page 1 of 4
Advertisement
Summary of Contents for Oliveri Santorini
- Page 1 Santorini Installation Instructions ST-BL1584U Farmhouse Undermount Sink THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSON STOP AND READ CAREFULLY The latest technological advances are used in the manufacturing process of our sinks which are tested a number of times during the production process to ensure they comply with rigorous quality standards.
- Page 2 Risk of personal injury. Composite sinks are heavy. Get help when lifting CAUTION or moving. Be sure to use proper tools and always wear personal safety devices for your protection. Tools needed for installation SINK ASSEMBLY You MUST check the sink is NOT DAMAGED before proceeding with installation.
- Page 3 INSTALLATION STEPS Step 2 Cut out the Cabinet Front The front of the cabinet needs to be cut-out allowing the sink to protrude. Cut the front of the cabinet using the dimensions shown below. 822mm 240mm 838mm NOTE Measurement “C” must be greater than the height of the sink. (240mm).
- Page 4 WARRANTY Oliveri Solutions Pty Ltd ABN 12 007 551 886, of 51 Naweena Rd Oliveri is not liable for expenses you incur making a warranty claim Regency Park SA 5010 warrants to the original purchaser that the including the removal or replacement of a defective product.