Advertisement
Quick Links
FLEXBOX PROGRAMMING TOOL FOR THE
AUTOMOTIVE SECTOR
USER
FLEXBOX - BORN TO BE FLEXIBLE
FLX2.14
SKU: FLX1.9
This manual contains information on the features and operation of FLEXBox when used
with the FLX2.14 FLEXBox OBD Female cable.
The manual illustrates the basic instructions for proper operation and describes the
functions that are enabled when connecting with the FLX2.14 cable.
Advertisement
Related Manuals for Magic FLEXBOX
Summary of Contents for Magic FLEXBOX
- Page 1 FLEXBOX - BORN TO BE FLEXIBLE FLX2.14 SKU: FLX1.9 This manual contains information on the features and operation of FLEXBox when used with the FLX2.14 FLEXBox OBD Female cable. The manual illustrates the basic instructions for proper operation and describes the...
- Page 2 SETUP PHASE PLUG THE 2.14 FLEX CABLE INTO THE FLEXBOX DB44 SOCKET CONNECT THE FLEXBOX TO THE POWER SUPPLY FLEXBOX INTERFACE VIA 2.14 FLEX CABLE WITH THE PROGRAMMER FLEXBOX INTERFACE VIA COLORED SILICON CABLES WITH THE UNIT THE LINES WILL LIGHT UP AS SHOWN...
- Page 3 SECOND FUNCTION CAN-H K-LINE 9 10 11 12 13 14 15 16 CAN-L +14V L-LINE FLX2.14 PIN OUT +14 Volt POWER SUPPLY CAN-HI CAN-LO K-LINE L-LINE SLOW BLINKING LED 0 Volt (~ mA) FAST BLINKING LED 3,3 Volt (~ mA) +5 Volt (~ mA) SHORTCUT...
- Page 4 FOURTH FUNCTION CAN-H K-LINE 9 10 11 12 13 14 15 16 CAN-L +14V L-LINE FLX2.14 PIN OUT +14 Volt P.S. IGN MANAGED BY THE USER CAN-HI LOOP MODE CAN-LO EACH PUSH K-LINE IGN ON/OFF LOOP MODE L-LINE PRESS 3 SEC TO RESET SLOW BLINKING LED 0 Volt (~ mA)