Advertisement
Quick Links
Thank you for purchasing a Patlite
please read this instruction manual thoroughly before attempting to use the system. Also
when undertaking maintenance, inspection or repair work, be sure to refer to this manual. If
you have any questions regarding this product, please feel free to contact us.
Note to be followed to prevent any damage to the user and other personnel or to assets are as follows
■The indications for warning are divided into the following classes according to the degree of danger or damage incurred when the
warning is not taken into consideration and the product is not correctly used.
Caution
Caution
●Use only specified operating voltage. Excess voltage hastens degradation.
●This product is for indoor use only. It should be used in a place where it is protected from rain and water.
Moisture in the unit could cause a breakdown of the unit or electric shock. (type BM/BM-H only)
●When this model is being used continuously in a long time, it starts having heat but it is normally operated.
1. HOW TO MOUNTING
Tighten the ring by hand securely.
Ring
Gasket
[ Mounting dimensions ]
Φ30.5
According to the thickness of the board decrease or increase
※
the gaskets.
3. SPECIFICATIONS
BM-202
BM-202D
Model
BM-202H
Voltage
24V AC/DC
80 dB(at 1m)
BM
Sound
level
BM-D
75 dB(at 1m)
(MAX)
BM-H 85 dB(at 1m)
Operating temp. range
This product conforms to EN standard and shows the CE Marking.
This product has been tested and found to comply with the limits for a Class A device, pursuant to EMC DIRECTIVE.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This product must not be used in residential areas.
配布先
製造
１
PALBA ３
合計 ４
INSTRUCTION MANUAL
Signal Phone. To ensure proper operation,
NOTES TO BE OBSERVED FOR SAFE OPERATION
This symbol marks important instructions that, if ignored or incorrectly followed, could conceivably lead to
injury or property damage.
Board
(Max. thickness is
7mm)
BM-210
BM-212
BM-210D
BM-212D
BM-210H
BM-212H
100V AC
120V AC
85 dB(at 1m)
80 dB(at 1m)
90 dB(at 1m)
-10℃～+60℃
[ TYPE : BM]
2. HOW TO MAKE WIRING CONNECTION
・
As for wiring connection, use a wire stranded wire or
clip type terminal lug.
This model is operated when voltage are supplied
・
between Common and Ch1 or Ch2.
・
You can select two different types of sound by changing
wiring connection. (Ch1 and Com, Ch2 and Com)
When voltage are supplied onto Ch1 and Ch2 at once.
・
[ Wiring example ]
Outer contact
This model contains two sheets of gasket.
※
(2mm thick×2pcs. 3.5mm thick×1pc.)
BM-220
BM-220D
BM-220H
220V AC
(24V DC only)
No， 39
承認
芳田
'10.7.15
理由：誤記修正
(No.49-0001D)
CH2
COM
CH1
Fuse
Clip type terminal lug.
Ch
Type of sounds
Ch1
Peepo Peepo
Ch2
Pipipipi
Specifications are subject to change
※
without notice.
(24V DC only)
C95100093 G
検図
作成
芳田
藤原(晃)
'10.7.13
'10.7.15
Power supply
O95100093
G
'16.8 UBC
Advertisement
