Bryan Boilers BE-210-WT4T7 Specifications

Indirect Water Heaters

Note these features:
Long life indirect heat exchanger and Incoloy
sheathed electric heating elements
All brass and copper fi nned-tube, high-effi ciency heat
exchanger transfers heat from hot heater water to service
water fl owing through exchanger. This results in both long
electric heating element and long heat exchanger life with
trouble-free operation. Special Incoloy alloy also substan-
tially contributes to electric element life as compared to
copper sheathing used in conventional electric heaters.
Economical scale-free boiler operation
Scale-free operation means higher continuous heat trans-
fer effi ciencies and reduction of maintenance costs. Con-
ventional electric heaters generally require periodic shut-
down for descaling of elements. Bryan's indirect closed
system heating means little or no scale build-up.
Corrosion-resistant operation
Corrosive and scale forming service water does not come
into direct contact with steel heater parts and electric
heating elements. Service water being heated circulates
only through the copper indirect heat exchanger within a
temperature range that eliminates or minimizes chemical
BRYAN
Bryan Electric
98,300 to 1,081,100 BTUH
30 to 330 KW
Model BE-210-WT4T7
reactions such as oxidation or precipitation, the principal
causes of corrosion and scale formation.
Condensation free
The Bryan indirect heater operates at water temperatures
that eliminate problems caused by moisture from sur-
rounding air condensing as water, contributing to rusting
and wet fl oors.
Quality construction
Structural framework supports primary hot water vessel
and power panel cabinet. Vessel and frame protected by
a heavy 16 gauge steel, zinc-coated jacket attractively
fi nished with two coats of enamel.
Applications
Versatile for all typical commercial and industrial applica-
tions, such as schools, apartments, hotels and motels,
laundries, restaurants, hospitals, factories, etc. The heater
may be used in conjunction with a storage tank (the tank
and accessories may be supplied by Bryan as a packaged
"Water-Pak") or if the application permits, may be applied
as a "tankless" installation. Available alternative to fossil
fuel units when strict emission requirements must be met.
BOILERS
®
Form No. 4800
(Rev. 11/06)