KATA AB-301 Quick Start Manual

Protective Carrying Technology
www.kata-bags.com
AUXILIARY POUCH SYSTEM
The Auxiliary Pouch System will allow you to comfortably store and easily access all
your lenses, flash and camera bodies. This modular system lets you carry as many
or as little pouches either on the belt or with the added harness for extra support.
You can connect up to 6 pouches recommended anywhere on your belt for various
carrying possibilities. Pouches for full size DSLR bodies, professional flash, and many
different sizes of lenses are available for purchase separately to match your kit.
Features:
• Signature TST protection protects your gear within the pouches.
• Adjustable belt and harness for ultimate comfort.
• Padded removable insert for most pouches for extra protection and space
when needed.
• Overlapping belt closure for securing on belt.
• Exterior and interior pockets for storing lens caps, filters and other
accessories.
Name: AB-301 Order code: KT AB-301
AB-301 Dimensions
Minimum girth
86 cm 33.9"
Maximum girth
160 cm 63"
Width
9.5 cm 3.75"
Weight 0.28 kg 0.62 lbs.
Name: AB-302 Order code: KT AB-302
AB-302 Dimensions
Minimum girth 86 cm 33.9"
Maximum girth
160 cm 63"
Width
9.5 cm 3.75"
Weight 0.28 kg 0.62 lbs.
*Dimensions measures belt only on each
BELT AND HARNESS
The Auxiliary Pouch System gives you the option to either
purchase the AB-302 full harness which includes both the
belt as well as the shoulder harness, or to purchase the
AB-301 belt to be used individually.
To properly adjust the belt:
1. Start by quickly trying on the belt and buckling. You
may find that you need to lengthen or shorten.
2. If no adjustment is needed, simply clip the main front
buckle and tighten by pulling the ends of the strap to
your sides. (see fig. 1)
3. To adjust the length of the belt, take the belt off and
open each end of the inside of the belt. You can now
adjust each end using the hook and loop to match your
needed waist size. Widening the belt will reveal an extra
pouch connection,( provided you are able to wear the belt
wide comfortably). (see fig. 2)
4. Close the inside large hook and loop connection on
the inside of the belt.
To properly adjust and install the shoulder harness:
5. Follow the steps above first to adjust the belt.
6. The harness has an adjustable rear connection as
well as two frontal connections with 2 different buckle
options.
7. Put on the belt and shoulder harness, making sure
that the rear connection is attached and the two frontal
connections are attached with the corresponding buckle,
either with the two front or the two D-rings.
If the height of the harness needs adjustment, take off
and adjust the back hook and loop connection to the
desired length. (see fig. 3)
8. Put the harness back on. You can clip the front two
attachment buckles to either the inside or outside D-rings
according to your comfort. (see fig. 4)
9. Pull the excess straps of the shoulder harness to tighten
comfortably on your body. (see fig.5)
AB-301 Belt with Pouches AB-302 Full harness with
pouches
fig. 1
fig. 2
fig. 3.
fig. 4
fig. 5