zeppy sound buddy Quick Manual

get started
OPEN HERE
basics
If you have already paired a zeppy with another zeppy,
you can reconnect by pressing this button once.
PRESS HERE TO SELECT
BONGIOVI SOUND MODE
zeppy your new
sound buddy
quick-guide
Please read me,
because zeppy is different
PRESS AT THE SAME TIME
PRESS + AND - SIMULTANIOUSLY
USB - CHARGING UNIT
VOLUME & TRACK CONTROL
Volume control - short press + -
Track control - long press + - for 0,5 seconds
LED LIGHTS
Power ON:
Press both + and – simultaneously. Zeppy will start up with a "beat bass"
sound. Battery indicator ("zep") will show up, Bluetooth light (blue LED
under second "p") will flash and speaker pairing light (red LED under "y")
will light up. Zeppy will ALWAYS start in MUSIC mode and with 70% of
its full volume setting. To Turn OFF zeppy press + and - simultaniously
for 1 Second.
Connecting with Bluetooth source:
Turn on your Bluetooth signal on your source, e.g, smartphone, tab-
let, computer. Search for new device. "zeppy xxx" ( xxx can be a letter
and/or number combination) will be displayed in your device history.
Start connecting by taping your found device name on your BT device.
A successful pairing is followed by a double beep sound. Now zeppy is
stored in your Bluetooth log history and you do not need to search for it
in the future anymore when you want to get connected.
Scope of delivery:
1 x zeppy audio speaker, 1 x loop, 1 x USB Typ C charging cable
CAUTION:
Before you use zeppy the first time please make sure to fully charge
zeppy with the supplied charging cable at an USB 5V / 1,5 A max power
source. This can take up to 4 hours. Zeppy is fully charged if all 3 green
LED (zep) are steadily lighted up (no flashing) or have turned off after
15 min once charging is completed.
Using zeppy:
Your Bluetooth connected zeppy is always your MASTER speaker.
Operation of zeppy is different as you might be used to of previous spea-
ker products. Buttons are hidden behind the flexible housing and need
some pressure to be reached.
Sound control button to select different sound profiles is hidden in the
left corner of the membrane and selected by pushing down the mem-
brane on the left centre edge. White backlight LED will jump to next
sound profile by each press of the button. The reason for stronger control
buttons is to avoid male function during use in water or when placing
zeppy on your body, below neck or head, to experience new sound per-
formance. You will get used to it, once you have adapted to the sensivity
of those buttons.
Volume control:
Short press (you will feel the pressure point of the control button) + or – to
increase or decrease your output volume. Make sure you set your output
volume on your source to max if you want to get full output volume on
zeppy. zeppy will always start up with 70% sound volume setting.
Track selection:
Keep holding "+" for 0,5 seconds will skip forward to next track.
Keep holding "-" for 0,5 seconds will skip backwards.
Two short press on "-" will play previous track.
Pause and Play:
Short press of + and – together will pause music.
To continue playing short press + and – simultaneously again.
Incoming calls from a mobile phone will not be transferred to the speaker.
Music is paused and will continue once you have ended your call or denied
your call AT the phone direct.