Page 1
H27749 Centisecond Timer Module The Unilab stopclock is a versatile and distinctive piece of apparatus which has become standard in most British school laboratories. It is suitable for general purpose timing for up to one hour in centi-second (H27749) (1/100 a second) intervals.
Page 2
10s of minutes Months 0-12 Su-Sa Minutes Stopclock Mode The stopclock starts timing when the black start/stop button is pushed, not when it is released. Similarly, if the timer is running, it will stop when the start/stop button is pushed. version H27507.16.07...
Page 3
Long leads should be used so the tester can hide switch A and start the timer. The subject of the test should watch the timer and push switch B to stop the timer as quickly as they can after it starts. version H27507.16.07...
Page 4
A and B respectively. Light gates or switches can be connected to these to control the stopclock. The module functions in two modes, selected by the two-position switch on the top. version H27507.16.07...
Page 5
For example, a vehicle passes through one light gate, and then through another. The stopclock will start timing as soon as the vehicle blocks the first light gate, and stop timing as soon as the vehicle blocks the second light gate. version H27507.16.07...
Page 6
This advice is not a replacement for a formal risk assessment, which should be carried out according to your school or LEA policy. Warnings For your safety, this product should be used in accordance with these instructions, otherwise the protection provided may be impaired. version H27507.16.07...