Page 1
Installation and Operations Manual for VIPER ATV/UTV Winch Series VIPER CLASSIC Replacement Parts X3000/EX3500/EX4000/EX4500/EX5000/SE4000/SE4500/SE5000 VIPER MAX Item# Drum Motor EX201 VIPER ELITE Drum BushlnQ EX202 EX203 Seal EX204 Drive Shaft EX205 SorinQ EX206 Drum Assembl v Seal EX207 Drive Shaft...
Page 2
Thank you for your purchase of the VIPER WINCH from Our winches MotoAiliance. are sold by dealers around the world and are known for premium performance at prices people can afford. I. WINCH FEATURES Which VIPER WINCH is right for you?
& & matoal/iance matoalliance II. SAFETY PRECAUTIONS As operator of this product, the responsibility for safe operation ultimately lies with you. It is important that you read and understand all the safety precautions and operating instructions prior to installing and operating your winch. Failure to understand the proper operation of this product can result in serious injury and/or property damage.
*Installing the rubber line stopper on your cable. 3. P battery connection. Keep winch within distance 8. If your kit came with the rubber line stopper (standard on VIPER MAX and VIPER Poor ground. allowed by lead wires. Check battery terminals for Damaged motor.
Page 5
5. Do not operate under the influence of drugs, alcohol, or medication. c. use only a hawse fairlead as a roller fairlead can significantly damage the Do not connect the winch to either 11 OV AC h o use current or 220V as winch rope d.
WINCH PROCESS: If you believe your winch is defective, we may ask you to Mount corded remote, if you have a VIPER MAX according to the diagram in send it in for evaluation or send digital pictures of the are in question. Your winch figure 3a.
Page 7
4. Your motor and gears are fully sealed and submersible for all VIPER winches. **Please contact us directly if you need installation assistance. However, mud, sand, silt, and water are HIGHLY CORROSIVE and can degrade the seals and lubrications systems if the winch is not carefully cleaned and dried after each use.
5 or 6. FREEWHEEL MUST BE ENGAGED before winching. Never Tob1:1ttoryposltlvo. To winch nogotlve. (RodPo:it) (YollowPOGl) attempt to free or engage the knob while the drum is turning. VIPER CLASSIC/MAX FIGURE THREE. FIGURE FOUR. Contactor Wiring for EX3000/EX3500/EX4000/ Contactor Wiring for MX3500/MX4000/ EX4500/EX5000/SE4000/SE4500/SE5000...