Zero Image BTN Series Manual

Thanks for purchaing the Zero Image wooden pinhole camera Zero2ooo.
With Zero 2000, the creativity of photography will be unlimited.
read this manual before your first shot for best results.
B
C
A
E
1. Turn the top cover lock (C) counter-clockwise to open the top
cover (B).
2. Slide out the back cover (H).
3. Insert the tongue of the backing paper of a fresh roll film into
the slot of the take-up spool.
4. Insert the fresh film and pick-up spool into the camera with the
fresh film at the right-hand side of the camera.
5. Slide back the back cover (H), the film counter (F) should be at
the left hand side of the camera.
6. Cover the top cover (B), adjust the film winding knob (D) so as
it can insert into the slot (on top of the spool), then turn the
top cover lock (C) clockwise to lock the cover. Don't be too
tight or you may damage the thread of the camera.
7. Turn the film winding knob (D) clockwise* until number "1" is
displayed in the frame counter (F).
8. For the next frame, simply turn the film winding knob again
until the next number is displayed. Remember to advance the
film after every exposure.
9. After the last film is exposured, turn the film winding knob (D)
to wind the remaining film onto the take-up spool.
10. Open the top cover and remove the exposed roll of film.
*The mechanism prevent you from turn the film winding knob counter-
clockwise so as to prevent the film from curing back. If you force to do
that you will damage the camera.
Zero2ooo
Zero 2000 camera is easy to use,
Nomenclature
D
G
Loading film
I
A. Shutter
B. Top cover
C. Top cover lock
D. Film winding knob
E. Lens
F
F. Film counter
G. Exposure guide
H. Back cover
I. Tripod socket
H
Fresh Film