Page 1
Assembly Instructions Design-radiator (SD) Parts Supplied Fittings Supplied (for solid walls) Description Illustration Radiator Description Illustration Illustration Masonry plug Screw Insert bush Outer casing Screw plug Grub screw Air vent Tools Required (not supplied) Drilling Machine Drill 8 mm masonry 22 mm Spanner Screwdriver Hammer...
Page 2
Installation 1. For masonry walls drill 4 holes to a depth of approximately 60 mm and a diameter of 8 mm. The upper pair of fixings should be below the 7th horizontal tube the lower ones above the 7th tube from the bottom ( horizontal distance about 200 mm ; vertical distance 1147 mm ) The distance from the floor to the bottom of the radiator must be at least 200 mm for efficient heating ( ventilation ).