AMT GhostBusters ECTO-1 Assembly Manual

STEP 4 STEP 4
Last Touches.
Add the Ghostbusters™ stickers to the front doors and the
rear of the vehicle along with the Hubcap emblem stickers.
Place ECTO-1 license plates on the front and the rear.
STICKER
NEW YORK
X4
STICKER
Look for these and other great kits from
AMT750
Ghostbu ers™
ECTO-1A
STICKER
X2
AMT801
Christ ne
1958 Plymouth F ry
STICKER
NEW YORK
STICKER
POL91
Back to he Fut re™
Time Machine
round2models.com
For more information, visit:
collectormodel.com
visit our blog at:
POL914/12
1/25 scale model kit
P914-200
ASSEMBLY MANUAL
Assembly: Carefully study and understand the
ECTO-1 INFORMATION
entire instruction sheet. Compare the parts in the box
WHAT COULD BE MORE APPROPRIATE FOR CHASING
to the instruction sheet to be sure you have received
GHOSTS THAN A BLOCK-LONG '59 CADILLAC
all the parts required. Carefully remove parts from
AMBULANCE, SPECTACULARLY OUTFITTED WITH trees. If subassemblies and components are painted
do so before any parts are attached. Use only cement
ECTOPLASMIC SURVEILLANCE, DETECTION AND STORAGE
and paint made for styrene plastic.
EQUIPMENT FOR THE ETHERIAL BOGIES? PLUS, ENOUGH
Painting: Painting is optional and is not required
FLASHING LIGHTS TO LIGHT UP A SMALL TOWN?
to complete kit. Wash parts thoroughly with mild soap
WHY, NOTHING ELSE EVEN COMES CLOSE - IT IS THE
and water. Parting lines, glue joints, and sharp edges
PERFECT VEHICLE FOR THIS SPOOKY JOB. WHETHER IT'S
should be sanded or filled with filler putty designed for
SLIME IN YOUR REFRIGERATOR OR DANCING FURNITURE
plastic. Apply a "primer" coat and allow to dry. Check
OR REAL GHOSTS IN YOUR TV, THE ECTO-1 IS ALWAYS ON parts for imperfections and repeat the procedure if
necessary. Remove any lint or dust. Apply paint
CALL. AND WHO ARE YOU GONNA CALL?
evenly, in several thin coats rather than one heavy
GHOSTBUSTERS, THAT'S WHO! THEY BELIEVE YOU.
coat. Allow each coat to thoroughly dry before the next
is applied.
sanded" using slightly damp No. 1200 sandpaper. Be
1
S K I L L Contents include: All plastic pieces to complete
careful not to remove any detail while sanding.
N I V E A U model, metal axles and pictorial instructions
describing assembly. Paint and glue not included.
N I V E L
Lightest colors should be painted first. Use frosted
tape to mask off areas not to be painted. Remove tape
Round 2, LLC
International Hobbycraft (UK) Ltd.
4073 Meghan Beeler Ct.
21 St. Thomas St.
after paint is dry to the touch. Use a very fine brush to
South Bend, IN 46628 Bristol BS1 6JS England
touch up edges.
round2models.com collectormodel.com
STICKERS: See back of instruction sheet for
Ghostbusters and Christine TM & ©2013 Columbia Pictures Industries, Inc. All rights reserved. GENERAL MOTORS Trademarks
used under license to Round 2, LLC. Back to the Future ™ & © Universal Studios and U-Drive Joint Venture. POLAR LIGHTS, MPC,
proper application.
AMT and design, and ROUND 2 and design are trademarks of Round 2, LLC. ©2013 Round 2, LLC, South Bend, IN 46628 USA.
Product and packaging designed in the USA. Made in China. All rights reserved.
Model professionally assembled and finished by Mike Wherry
Each coat should be carefully "wet