Advertisement
Quick Links
Hanwha - WRT/WWT-3301/5301 - Hard Drive -
This document will demonstrate how to replace and install Hard Drives for the WRT/WWT units.
Step 1 - Prepare for Hard Drive Replacement
Before removing the lid and performing any work inside the chassis,
please ensure:
●
You have powered down the unit via the Windows interface;
●
The power cable has been removed from the unit;
●
You are properly grounded. Simple ways to ground yourself are:
● Wearing an ESD strap.
● Making contact with a grounded portion of the chassis.
Step 2 - Contents of FRU Replacement Kit
●
The kit will contain:
● Replacement Hard Drive(s)
● (1) FRU Guide PDF
© 2019
Field Replacement Unit
Page 1 of 3
Advertisement
Related Manuals for Hanwha WRT-3301
Summary of Contents for Hanwha WRT-3301
- Page 1 Hanwha - WRT/WWT-3301/5301 - Hard Drive - Field Replacement Unit This document will demonstrate how to replace and install Hard Drives for the WRT/WWT units. Step 1 - Prepare for Hard Drive Replacement Before removing the lid and performing any work inside the chassis, please ensure: ●...
- Page 2 Step 3 - Drive Tray Prep ● Open the front bezel door to gain access to the Hard Drives. ● Press the Blue button on the drive latch upward and the Drive Tray handle will pop out. ● The drive tray can be slid out of the unit now. ●...
- Page 3 Step 5 - Install Hard Drive 2 ● Slide the drive back into the drive bay and push the drive arm down until it locks in place. ● Repeat this process for as many drives as required. ● Hard Drive Installation is complete. ©...