Advertisement
Quick Links
Hanwha - WRT/WWT- 3301/5301 - Field
This document will demonstrate how to replace and install memory modules for the WRT/WWT units.
Step 1 - Prepare for Replacement
Before removing the lid and performing any work inside the chassis,
please ensure:
●
You have powered down the unit via the Windows interface;
●
The power cable has been removed from the unit;
●
You are properly grounded. Simple ways to ground yourself are:
● Wearing an ESD strap.
● Making contact with a grounded portion of the chassis.
Step 2 - Contents of FRU Replacement Kit
●
The kit will contain:
● Replacement Memory Module(s)
● (1) FRU Guide PDF
© 2019
Replacement Unit - Memory
Page 1 of 3
Advertisement
Related Manuals for Hanwha WRT-3301
Summary of Contents for Hanwha WRT-3301
- Page 1 Hanwha - WRT/WWT- 3301/5301 - Field Replacement Unit - Memory This document will demonstrate how to replace and install memory modules for the WRT/WWT units. Step 1 - Prepare for Replacement Before removing the lid and performing any work inside the chassis, please ensure: ●...
- Page 2 Step 3 - Remove/Install Memory Modules ● To remove the side panels from the chassis; loosen and remove the (4) highlighted screws. ● Do not discard or misplace the lid screws. ● Locate the Memory Modules. ● Follow the diagram: ●...
- Page 3 Step 5 - Remove/Install Memory Modules 3 ● When replacing the side panels, ensure the venting is toward the bottom of the unit. ● Reinstall the (4) screws ● Memory installation is complete. © 2019 Page 3 of 3...