PUSH KNOB LATCH PKL-07 、 PKL-08
INSTALLATION MANUAL
Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct
installation. Please keep this manual at hand for future reference.
DIMENSIONS
Counter plate
Round head wood
screw 3.1×10
2
INSTALLATION
Mounting Parts
Round head wood
screw 3.1×10
Counter plate
Inner surface of
side board
Operation Check
Latch body
Truss head screw
M3×25
4
Round head wood screw
3.1×28
Push knob
34
Knob
Check if latch works properly while
pushing the knob (once to lock, once
again to unlock).
Be sure to push the knob at closed
position. Latch may be damaged
if you close the door after pushing
the knob.
SUGATSUNE KOGYO CO.,LTD
Tokyo, JAPAN
Phone: +81 (0)3 3866 2260 E-mail:export@sugatsune.co.jp
DOOR PROCESS DIMENSIONS
Truss head screw M3×25※
Round head wood screw 3.1×28
Back of door
Adjusting counter plate
Adjust the position so
that the latch operation is
smooth without backlash.
40
+0.2
0
28
+0.2
0
Door surface
※Do not overtighten
Fastening counter plate
With the round head
wood screw fasten the
plate through the round
hole.
2019.01 1279-1