Brother HL-1650 Quick Setup Manual

Laser Printer HL-1650/1670N
Quick Setup Guide
Read the "Safety Sheet" first to ensure that you use this printer safety.
Read this "Quick Setup Guide" before you set up the printer.
Before you can use the printer, you must set up the hardware and install the driver.
Identify the operating system on your computer (Windows
® ®
Windows 2000 or Macintosh ).
The interface cable is not a standard accessory. Some computers have both a USB and a
parallel port. Please purchase the appropriate interface cable for the interface you intend to
use (parallel, USB or Network).
Follow the instructions in this guide for your operating system and interface.

Carton components

Carton components may differ from one country to another.
Save all packing materials and the printer carton. They should be used when shipping the printer.
CD-ROM Documents
Drum unit assembly AC power cord
(with toner cartridge included)
What is included on the CD-ROM
You can get a variety of information from this CD-ROM.
Initial setup
See the complete setup
process from hardware setup
to driver installation on a
movie.
We recommend that you
follow these instructions when
you first setup the printer.
®
Windows
Install Software (only for
®
Windows )
You can install not only the
printer driver but also the
following utility items.
For all users
-Printer Driver
-Automatic E-mail Printing
®
Macintosh
For administrators
-BRAdmin Professional
-Network Printer Driver Wizard
-Network Print Software
-Storage Manager
Printer Driver Installer (only
®
for Macintosh with USB)
BR-Script PPD Installer (only
®
for Macintosh with Network)
©2000 Brother Industries, Ltd.
Windows ® and Windows NT ® are registered trademarks of Microsoft Corporation in the U.S. and other countries.
® ®
Macintosh and iMac are registered trademarks of Apple Computer, Inc.
All other brand and product names are trademarks or registered trademarks of their respective holders.
For all users
Step 1 Insert the CD-ROM into the CD-ROM drive
For Windows
® ®
95 / 98 / Me, Windows NT 4.0,
1 Insert the CD-ROM into the CD-ROM drive.
The opening screen will appear
automatically.
Printer
Click the Initial Setup icon.
3
Step 2 Install the drum unit assembly
Front cover
LJ5025001 Printed in China
Press the cover release button, and then open
1
the front cover.
Step 3 Load paper into the paper cassette
Manual
View the Printer User's Guide,
Network User's Guide and
other documentation.
Brother Solutions Center
Introduction to the Brother
user support web page.
You can easily access it and
receive the latest drivers and
information for this printer.
Pull the paper cassette completely
1
Maintenance Tutorial
out of the printer.
See the maintenance videos
for this printer.
We recommend that you view
the videos before getting
started.
Step 4 Print a test page
Make Disk Sets (only for
®
Windows )
O I
OFF ON
Make sure the printer power switch is off.
1
Connect the AC power cord to the printer.
Do not connect the interface cable.
® users only
2 Select the language you want.
You can view the Initial Setup
4
instructions.
Cover release
button
Remove the protective part.
2
Paper guide release lever
Paper cassette
While pressing the paper guide release lever, slide the adjusters to
2
fit the paper size. Check that they fit correctly into the slots.
Note: For Legal or 8.5 x 13 in. paper, press the universal guide
release lever as you extend the rear of the paper cassette.
O I
OFF ON
Plug the AC power cord into an AC
2
outlet.
Turn the power switch on.
For Macintosh ® users only
1 Insert the CD-ROM into the CD-ROM
drive.
Select the language you want.
3
Unpack the drum unit assembly. Install the drum unit assembly
3 4
Rock it from side to side 5 or 6 times to into the printer.
distribute the toner evenly inside the
assembly.
Up to here
Universal guide
release lever
Load paper into the paper cassette.
3
Check that the paper is flat in the tray and below
the maximum paper mark.
Extend the tray
extension flap
READY PRINTING
Data Data
Back
Reprint Reprint
Set
Job cancel
Go
After the printer has finished warming up, Press the Go switch. The printer prints a test page.
3 4
the READY message appears. Check that the test page is printed correctly.
Note: When you want to set the control panel message language,
refer to the control panel section on the reverse side of this sheet.
2 Double-click the Initial Setup icon.
You can view the Initial Setup
4
instructions.
Close the front cover.
5
Re-install the paper cassette
4
into the printer.
Back
Set
Job cancel
Go
Continue to the reverse side.