KAEL Muhendislik Elektronik ENERGY 11-DIN Instruction Manual

ENERGY
www.kael.com.tr
Introduction
The device was designed to measure, report and analyse the electrical magnitudes in the 3-phase electric network and both design and software were
produced by KAEL engineers. The state-of-the-art technologies were inserted in this device and both menus which facilitate the use of the user and the
required features were included.
All the information and warnings you need to know concerning the device were described in the user operation manual. Please read this manual carefully
before engaging with the device. Please do not take any action before consulting with our company for any matters not clearly understood.
Tel: +90 232 877 14 84 (pbx) Fax: +90 232 877 14 49
Factory: Atatürk Mh. 78. Sok. No:10 Ulucak Köyü Kemalpaşa İzmir- TURKIYE
WARNINGS
1- The device shall be engaged by competent and licensed persons in conformity with the instructions set forth in the operation manual. In case required,
controls shall be carried out by such persons also.
2- Do not open the inside of the device or cause to be opened. There are no parts inside the device which the user or anyone else may intervene.
3- Use the device according to assembly instructions
4- Before making electrical connection to the terminals of the device, make sure there is no electric power on the cables and terminals. The switchboard
shall not have electric power on.
5- The fuses used in the device are of 1A FF type.
6- Make sure to fix the device on the switchboard firmly without swings with the apparatus given with the device.
7- Do not touch the keys on the front panel of the device with any substance other than your finger.
8- Wipe the device only with dry cloths after making sure the electric energy of the device is cut-off. Water or chemicals used for cleaning may cause
damage to the device.
9- Before activating (energizing) your device please make sure that the terminal connections are made according to the connection scheme and without
causing any contact problems (loose connection or contact of multiple copper cables).
10. The above measurements and warnings are for your safety. Kael Elektronik Ltd Şti or the dealer may not be held liable for any inconveniences when
those warnings are not observed.
Features
■ Easy use with menu
■ Improved dynamic software
■ Ability to enter current and voltage transformer rates
■ True RMS
Measurements
■ Active Energy
■ Inductive Reactive Energy (ΣkVARh(ind) )
■ Capacitive Reactive Energy (ΣkVARh(cap) )
■ Apparent Power (ΣkSh)
11-DIN
PARAMETERS:
Ct : current transformer ratio (1...5000 )
Ut : voltage transformer ratio (1...4000 )
PULS oUt : Pulse out
CLr : clear
rES ALL PAr : reset all values
KAEL
(ΣkWh)
ENERGY
MODEL
ENERGY-11-DIN
ENERGY-11-DIN 100A
Mühendislik Elektronik Tic. ve San. Ltd.Şti
■ Password protection
Outputs
■ Pulse Output ( 2pcs)
11-DIN 100a
ENERGY-11-DIN ENERGY-11-DIN 100A
With 100A currrent transformer
■
■ ■
■ ■
■ ■
■
■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■
■ ■ ■
.