Krom Schroder DMG S2601 Operating Instructions

บริ ษ ั ท เอดี ด ี เฟอร์ เ นส จ ำกั ด
ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 70 ถนนบรมรำชชนนี แขวงศำลำธรรมสพน์ เขตทวี ว ั ฒ นำ กรุ ง เทพฯ 10170
โทร: 02-888-3472 โทร: ออกแบบ
https://www.add-furnace.com E-mail:
13.1.1.5 Edition 07.10
D GB F
www.docuthek.com
Operating instructions
Electronic pressure gauge
DMG S2601, DMG S2610
Translation from the German
© 2008 – 2010 Elster GmbH
Contents
Electronic pressure gauge ..............................1
DMG S2601, DMG S2610 .................................1
Contents ........................................................ 1
Safety .............................................................1
Checking the usage ........................................2
Type code ......................................................... ..2
Part designations ................................................2
Type label ...........................................................2
Commissioning ..................................................2
Segment displays ................................................ 2
Connecting the measuring hoses ........................ 2
Selecting the operating mode ..............................2
ZERO (zero point calibration) operating mode .....
UNIT (unit selection) operating mode ..................
AUTO (measured value resolution) operating
mode ................................................................3
Min./Max. measured value ..................................
Hold function .......................................................
Display lighting ....................................................3
Switching off .........................................................3
Maintenance ....................................................3
Changing the batteries...................................... 3
Accessories .....................................................4
Assistance in the event of malfunction............4
Technical data ....................... .........................4
Declaration of conformity ..............................4
แฟกซ์ : 02-888-3258
08-08-170-170
:
sales@add-furnace.com
Safety
Please read and keep in a safe place
carefully before installing or operating. Follow-ing the
installation, pass the instructions on to the operator.
These instructions can also be found at
www.docuthek.com.
Explanation of symbols
● , 1 , 2 , 3
Liability
We will not be held liable for damages resulting from
non-observance of the instructions and non-compliant
use.
Safety instructions
Information that is relevant for safety is indicated in the
instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
!
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
3
Transport
3 On receipt of the product, check that the delivery is
complete (see Part designations). Report any trans-port
damage immediately.
3 Storage
Store the product in a clean, dry environment, protected
3
from shocks. Ambient temperature: see Technical data.
Disposal
Components, particularly batteries, are to be dis-posed
of separately.
On request, old units may be returned carriage paid to
Elster GmbH in accordance with the relevant waste
legislation requirements (for Germany: KrW-/AbfG [Act
for Promoting Closed Substance Cycle Waste
Management and Ensuring Environmentally Compat-
ible Waste Disposal]).
Please read through these instructions
...= Action
= Instruction