PNY P-AC-2QI-KEBA10W1-RB User Manual

Contents
Dual Wireless Charging Base
Wired DC Adapter
To avoid damaging your product or injuring yourself or others, please
carefully read the recommendations below before using your product.
Keep these safety instructions in a place where they can be easily
accessed by any person who may be required to use this equipment.
Model Input
P-AC-2QI-KEBA10W1-RB
P-AC-2QI-KKBA10W1-RB DC 12V/2.4A
P-AC-2QI-KRBA10W1-RB
LED
State
Blue and green lights flash alternately for 2 seconds
Green light constantly
Blue light constantly
Green light constantly for Samsung phones, blue light
constantly for Apple phones
Blue light flash quickly
Safety Instructions
• Before connecting your charger, make sure that the voltage in your home is
equivalent to the voltage indicated on the rating plate of the device.
• Connect the charger to a nearby, easily accessible mains socket.
• Keep the charger dry at all times. To avoid electric shocks, never submerge the
charger into water or any other liquid. Do not expose the charger to rain. Do not
place your charger near water or a source of humidity or objects filled with
water, such as a bath, wash basin, kitchen sink, swimming pool, in a damp cellar,
or any other location with high humidity.
• Do not place the device in the following locations:
- in direct sunlight, near a source of heat or a radiator, or in any other
location subject to high temperatures.
- in an enclosed vehicle directly exposed to sunlight, in dusty or dirty
environments.
• Do not store your charger in environments subject to low temperatures.
When the charger returns to normal temperature, moisture can form inside the
device and damage the electronic circuits.
• Never use sharp objects to access the inside of the charger.
• Do not knock the charger or subject it to violent shocks.
Connect to Power Adapter
1. Connect the power adapter
to socket.
2. Power line is connected with
the charging plate.
3. The standby indicator light
is green.
Output
Output total : 20W
Charging slot #1: 10W (5W/7.5W/10W max)
Charging slot #2: 10W(5W/7.5W/10W max)
Indication
Power on
Stand-by mode
Wireless charging
Fully charged
Foreign object detected
(FOD), no charge
• Keep the charger out of the reach of children.
• Ensure that the various cables are correctly connected to avoid damaging the device.
Avoid excessively bending or pressing too hard on the cables connected to
the charger.
• Disconnect this device during storms or when it is not used for a long time to avoid
causing damage.
• This equipment has been designed with great care for the safety of those who will
set up and use it. However, particular attention should be paid to the risks of electric
shock and static electricity when using electrical equipment. All recommendations
issued by this product's manufacturer must be followed at all times to ensure
safe use of the equipment.
• If the charger functions abnormally, and in particular if it produces noises or odours
that seem abnormal, disconnect it immediately and have it inspected by a
qualified technician.
• Only wipe the charger with a soft, dry cloth.
• No part of this device can be repaired or replaced by the user. Only have repairs
and maintenance carried out by qualified technicians.
Dual Wireless Charging Base
User Manual
FOD: Foreign Object Detection (FOD) is a safety mechanism which automatically interrupts
power delivery if there is interference caused by a foreign object such as coins, paper clips,
pharmaceutical wrappers...
Note: Please make sure your device is Qi compatible before use. If not, a Qi wireless
charging case is recommended.
EN
When the current required by the charger is too great or when a short circuit is detected,
the charger will automatically switch to safety mode. Once the fault has been resolved, the
charger will resume normal functioning.
FR Lorsque le courant demandé au chargeur est trop important ou lorsqu'un court-circuit est détecté,
il se met automatiquement en sécurité. Une fois le défaut corrigé, le chargeur fonctionne à nouveau
normalement. / DE Wenn die vom Ladegerät geforderte Stromspannung zu hoch ist oder wenn ein Kurzschluss
festgestellt wird, schaltet es sich automatisch ab. Nach Beheben des Fehlers funktioniert das Ladegerät
wieder einwandfrei. / ES Cuando la corriente que se solicita al cargador es demasiado importante o
cuando se detecta un cortocircuito, este se pone automáticamente en el modo de seguridad. Una vez
corregido el fallo, el cargador funciona nuevamente con normalidad. / IT Quando la corrente richiesta al
caricatore è eccessiva o quando viene individuato un cortocircuito, esso si mette automaticamente in
sicurezza. Dopo che il guasto è stato corretto, il caricatore riprende a funzionare normalmente. /
PT Quando o carregador deteta um excesso de corrente ou um curto-circuito, este entra automaticamente
no modo de segurança. Após a correção da anomalia, o carregador volta a funcionar normalmente. /
PL Jeżeli zapotrzebowanie na prąd z ładowarki jest zbyt duże lub w przypadku zwarcia, urządzenie
przechodzi automatycznie w tryb bezpieczeństwa. Po zniknięciu błędu, ładowarka wraca do normalnego
trybu działania. / RU Если напряжение тока, подаваемого зарядным устройством, слишком высокое,
или если обнаружено короткое замыкание, оно автоматически переходит в безопасный режим.
После устранения неисправности зарядное устройство будет работать в нормальном режиме.
Charging Mode
1. Make sure the wireless charger
dock connect to the power supply.
2. Put the Qi-enabled smart
phone properly on the transmitter,
the indicator light become blue
and start charging. The device
enter to standby mode when take
away the phone from charging
pad.
Note: When Samsung phones which are built-in
wireless charging function get fully charged
with this product, if don't move the phone in a
long time, the battery power keeps in fully
charged status (supplementary charge).
Information / Informations / Information / Información / Informazioni
Informação / Informative / Information / Oplysninger /
Lisätietoja / Informasjon / Részletek / Informací / Informacji
informácií / Информация / Πληροφορίες / Bilgi için :
www.pny.com/fastfacts ( USA )
USA PNY Technologies,
www.pny.eu ( Europe ) Inc.,100 Jefferson Road,
Parsippany, NJ 07054
Europe PNY Technologies, Inc.,
9, rue Joseph Cugnot. BP 40
181-33708 Mérignac cedex France
Please Recycle; to locate a center
© 2020 PNY Technologies
near you Call 1-800-8-Battery Free
All rights reserved. All trademarks
Technical Support: 1-800-234-4597
are properties of their respective
( USA ) tech-sup@pny.eu ( Europe )
owners. All rights reserved.
Inc.
®
INST0382