Download Print this page

logika 2 CPO White Mounting And Maintenance Instruction

Advertisement

Quick Links

Made in Italy
LOGIKA 2 ST_IM_ENG - Rev.09 of 16/09/16
Pic. 1
A
Pic. 3
Pic. 5
MOUNTING AND MAINTENANCE
INSTRUCTION
Pic. 2
B
C
A
Pic. 4
Suggested height of installation
Model
H
Model
MOUNTING AND MAINTENANCE
The connection system, on pole/bracket or wall
mounting, allows to install the luminaire parallel
to the street. See related section for particular
fixing on pole, bracket or wall mounting.
To gain access to the electrical parts, unlock
and open the frame [Pic. 1]. The lower frame
will open, stopping in vertical position [Pic. 2].
To connect the luminaire to the electrical line,
insert the cable into the cable clamp and then
connect it to the on-load switch. Tighten the
cable clamp with an adjustable wrench of
25mm applying a twisting moment of 5Nm.
The feeding of the fitting must be done with a
bipolar cable with nominal diameter between 7
and 13 mm.
When it is necessary, you can take away the
gear tray, loosen the screws (A-B) and
disconnect the main and lamp connectors (C)
[see Pic. 3-4].
To reinsert the gear tray, put it right position
and then loosen the two screws and reinsert
the connectors.
The reflector has been designed to function
without fitting inclination. The lamp holder can
be placed in 6 different positions, to adapt the
photometrical solid to the width of the street
[Pic. 5]. See lamp holder plate drawing for
detailed position.
INFORMATION TO THE CUSTOMERS
Directive 2002/96/EC (Waste Electrical and
Electronic
Equipment
information for users.
This product complies with EU Directive 2002/95/EC.
The crossed-out wastebasket symbol on the appliance
means that at the end of its useful lifespan, the product
must be disposed of separately from ordinary
household wastes. The user is responsible for
delivering the appliance to an appropriate collection
facility at the end of its useful lifespan. Appropriate
separate collection to permit recycling, treatment and
environmentally compatible disposal helps prevent
negative impact on the environment and human health
and promotes recycling of the materials making up the
product. For more information on available collection
facilities, contact your local waste collection service.
Power [W]
H min [m]
H max [m]
70W
5
100W
7
150W
7
250W
7
Weight [gr]
Wiring
Empty case
70 W
100 W
7000
150 W
250 W
ST
Pag. 1 of 3
-
WEEE):
10
12
13
14
With control gear
10400
10500
11500
12000

Advertisement

loading

Summary of Contents for logika 2 CPO White

  • Page 1 MOUNTING AND MAINTENANCE INSTRUCTION Made in Italy LOGIKA 2 ST_IM_ENG - Rev.09 of 16/09/16 Pag. 1 of 3 MOUNTING AND MAINTENANCE The connection system, on pole/bracket or wall mounting, allows to install the luminaire parallel to the street. See related section for particular fixing on pole, bracket or wall mounting.
  • Page 2 Dimensions Mounting Fix the LOGIKA 2 support to the plate trough the four 8MA x 100 screws (A). Tighten the four screws with a set screw wrench of 6mm applying a twisting moment of Nm. Tighten the two 8MA x 14 screws with a set screw wrench of 5mm applying a twisting moment of Nm to fix the fitting in horizontal position (B).
  • Page 3 MOUNTING AND MAINTENANCE INSTRUCTION Made in Italy LOGIKA 2 ST_IM_ENG - Rev.09 of 16/09/16 Pag. 3 of 3 CPO White White Son 140W 100W 150W 250W 100W 150W 250W 100W Ta = 30°C Optic Optic Optic Optic Optic Optic Optic...

This manual is also suitable for:

2 mhl2 shp2 white son