EMG -HZ Series Installation Information

EMG-HZ Diagram 6
2 Volume, 2 Tone w/switch
(each Volume is independent)
Volume
Finger Board pickup cable
Volume
Bridge pickup cable
Volu me
Fingerboard pickup cable
Bridge pickup cable
3.50"
EMG - 35 HZ
EMG-HZ
.34"
2.82"
MAXIMUM RECOMENDED STRING SIZE 2.625
4.00"
EMG - 40 HZ
EMG-HZ
.30"
3.40"
MAXIMUM RECOMENDED STRING SIZE 3.125
4.00"
EMG - 45 HZ
EMG-HZ
.29"
3.92"
MAXIMUM RECOMENDED STRING SIZE 3.75
Bottom View
.047
Tone
WHITE
.047
Tone
BLACK
EMG-HZ Diagram 7
1 Volume, 1 Tone
w/ 3 position lever switch
Bottom View
.047
Tone
BLACK
WHITE
0230-0043B
INSTALLATION INFORMATION
EMG-HZ Models:
35HZ, 40HZ, 45HZ
Each pickup includes:
5 pin cable pre-wired in Humbucking Series format
Adjustment screws
IMPORTANT INSTALLATION NOTES:
Recommended String Width
Model 35HZ 2.75 inches 4 string or narrow 5 string
Model 40HZ 3.125 inches 5 string or narrow 6 string
Model 45HZ 3.75 inches 6 string
All EMG-HZ bass pickups feature bar style construction.
Refer to the dimensions above for maximum string width.
EMG-HZ Warranty:
All EMG-HZ Pickups and accessories are warranted for a period of two
years. This warranty does not cover failure due to improper installation,
abuse, or damage. If it any time a pickup fails to work, return it postage
prepaid with proof of purchase. If upon examination the pickup is determined
to be defective, a replacement will be mad at no charge. Warranty
replacement products are covered under this same warranty. This warranty
covers only those pickups and accessories sold by authorized EMG
Dealers.
HZ 35 40 45 INST REV 0804