Download Print this page

Advertisement

Quick Links

Sync 1 and 2
Safety instructions
Intended use
This device is intended to be used for the wireless transmission of audio signals especially
for mobile applications. Any other use or use under other operating conditions is conside-
red to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that child-
ren do not detach any small parts from the product. They could swallow the
pieces and choke! Never let children unattended use electrical devices.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or flammable cleaning agents.
Scope of delivery
1 × receiver
1 × transmitter (item no. 516619)
2 × transmitter (item no. 516620)
1 × fur-windscreen (item no. 516619)
2 × fur-windscreen (item no. 516620)
Features
• professional digital 2.4 GHz wireless system with transmitter and receiver
• ideal for mobile applications as interviews, micro video recordings, vlogging
• transmitter with built-in microphone or external Lavalier microphone
• distorsion-free signal transmission
• switchable low-cut filter
• auto-pairing
Connections and operating elements Transmitter
ö
#
$
%
&'
left
front
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
1 × Tragetasche
()*
+
right
top
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Incorrect handling of lithium batteries can result in injury
• In the event of a short circuit, overheating or mechanical damage, lithium batteries can
cause severe injuries.
• When handled correctly and appropriately lithium batteries pose no risk.
• Store lithium batteries in a cool, dry place, ideally in the original packaging.
• Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batte-
ries are hermetically sealed. Never attempt to open a lithium battery.
• If the battery housing is damaged small amounts of the electrolyte may leak out. If this
should happen, seal the lithium battery in airtight packaging and wipe up the traces of
electrolyte using absorbent paper towels. You must wear protective rubber gloves when
doing so. Clean your hands and the affected surface thoroughly with cold water.
• Never attempt to recharge non-rechargeable lithium batteries. When charging lithium
batteries you must use a suitable charging device intended for the purpose.
• Before disposing of the device remove the lithium batteries. Protect used lithium batte-
ries against potential short circuits, e.g. by covering the poles with adhesive tape.
• Only use powder extinguishers or other suitable extinguishing agents to extinguish a
burning lithium battery.
Possible damage to lithium-ion batteries through incorrect storage
By deep discharge, lithium-ion batteries can be permanently damaged or lose some of their
capacity. Before long breaks, charge the batteries to around 50 % of their capacity and then
switch off the device. Store the device at room temperature or cooler in an environment as
dry as possible. If the batteries are stored for a longer period, recharge them to 50 % every
three months. Fully charge the batteries only shortly before use at room temperature.
1 × 3.5 mm TRS on TRS camera spiral cable
1 × 3.5 mm TRS on TRRS phone cable
1 × external Lavalier microphone (item no. 516619)
2 × external Lavalier microphone (item no. 516620)
1 × charging cable 1 × USB A to 2 × USB C (item no. 516619)
1 × charging cable 1 × USB A to 3 × USB C (item no. 516620)
• TRS headset output for real-time monitoring
• TRS recording output
• TRS microphone input
• Built-in lithium-ion battery
• Clip for installation on belt or clothes, also for installation on hot shoe
• Colour: black
ö Back clip
# Connection for external microphone
$ USB C charging port
% Main switch, keep pressed for 2 seconds for switching on/off
& Blue indicator LED for pairing
slow flashing:
switching on
fast flashing:
pairing
lighting up:
successfully paired
2× fast flashing, then
turning off, in cycle:
lowpass function enabled
' Green charge status indicator
slow flashing:
battery charging status less than 10 %
lighting up:
charging
turning off:
battery fully charged
( Button for forced shut-off
) Lowpass button
* Pairing button
+ Built-in microphone
DocID: 516619_516620_15.04.2021
EN

Advertisement

loading

Summary of Contents for T.BONE 516619

  • Page 1 1 × transmitter (item no. 516619) 1 × Tragetasche 2 × external Lavalier microphone (item no. 516620) 2 × transmitter (item no. 516620) 1 × charging cable 1 × USB A to 2 × USB C (item no. 516619) 1 × fur-windscreen (item no. 516619) 1 × charging cable 1 × USB A to 3 × USB C (item no. 516620) 2 × fur-windscreen (item no. 516620) Features •...
  • Page 2 The pairing automatically starts after switching on. If you like to pair the devices manually, receiver with the back clip on the hot shoe of the camera. keep pressed the pairing button (8) (item no. 516619) or the buttons (7) and (8) (item no. Gain setting 516620) on the receiver and the pairing button (9) on the transmitter for 3 seconds.

This manual is also suitable for:

516620