Advertisement
Quick Links
LORTONE
The NS8 is a heavy duty, cast aluminum shop arbor specifically designed for wet
grinding and polishing operations. It can be bolted to any workbench and the motor
mounted from the rear or underneath. The NS8 Long Shaft has an extended shaft for
when more clearance is needed.
01/12
NS8 Heavy Duty Arbors
Instructions and Parts List
•
Holds wheels up to 8" diameter
•
Bench-top design
•
Rubber mounted sealed ball bearings
•
Cast aluminum body won't crack or warp
•
Easy maintenance
LORTONE, inc • 12130 Cyrus Way, Mukilteo, WA 98275 U.S.A
Phone: 425-493-1600 • www.lortone.com
Copyright © 2010 Lortone, Inc
NS8 Long Shaft - Item# 040-060
NS8 - Item# 040-090
Page 1
Advertisement
Summary of Contents for Lortone NS8
- Page 1 The NS8 is a heavy duty, cast aluminum shop arbor specifically designed for wet grinding and polishing operations. It can be bolted to any workbench and the motor mounted from the rear or underneath. The NS8 Long Shaft has an extended shaft for when more clearance is needed.
- Page 2 Tighten shaft nuts securely. To mount wheels on the NS8 Long Shaft, use shaft nuts on either side of the wheel flanges. Use a water drip system or pump to provide coolant to the wheels. A splash shield may be required.
- Page 3 Bearing Isolator 481-026 Right Hand Arbor Nut, 3/4” x 16 481-046 Left Hand Arbor Nut, 3/4” x 16 LORTONE, inc • 12130 Cyrus Way, Mukilteo, WA 98275 U.S.A Phone: 425-493-1600 • www.lortone.com 01/12 Page 3 Copyright © 2010 Lortone, Inc...