Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Essence
Kitchen Faucet
Single Control with Pull Out Spray
85940
Polished Chrome
85941
Brushed Nickel
SPECIFICATIONS
• 35mm Ceramic Disc with Hot
Temperature Limit Adjustment
Ring.
• Brass Body with Copper Supplies
• Brass Supply Connection
Adapters with 1/2" IPS Threads.
• Polished Chrome Plated Metal
Handle.
• Single Control Lever Handle.
• Requires less than 5 lb force to
operate Handle.
• Temperature Adjustment 90° Full
Cold to Full Hot.
• 1.8 GPM (6.8 L/min) Aerator.
NEED HELP?
For additional assistance or service please contact:
1 Assemble Deck Plate to Faucet
2 Assemble Putty Plate to Faucet
3 Position Faucet on sink
4 From underside of sink, assemble Shank
Mount Washer and Shank Mount Nut, then
assemble Nuts to the Deck Plate Studs
5 Assemble Braided Spray Hose to the Hose
Quick Connect Fitting.
CAUTION: Make sure the Braided Spray Hose is
properly engaged and secure into the Hose Quick
Connect Fitting.
6 Assemble Hose Weight to the Braided Spray Hose.
7 Assemble Water Supply Lines to Faucet.
CAUTION: Use Wrench or Pliers to hold Faucet Inlet
Adapters when tightening Water Supply Line Nuts
to prevent twisting Copper Tubing or damaging
Solder Joints.
8 Remove Spray Wand from Faucet and flush
water through Faucet to remove any debris
within the system.
9 Assemble Spray Wand to Faucet and run
water through Faucet while inspecting all
connections for possible leaks.
SINGLE HOLE INSTALLATION
1 Assemble Single Hole Mount Flange to Faucet
2 Follow steps 4 through 9 from "3 HOLE INSTALLATION".
800-944-9292
3 HOLE INSTALLATION
www.wolverinebrass.com
92-85940-03
Advertisement
Summary of Contents for Wolverine Brass Essence 85940
- Page 1 INSTALLATION INSTRUCTIONS 3 HOLE INSTALLATION Essence Kitchen Faucet 1 Assemble Deck Plate to Faucet 2 Assemble Putty Plate to Faucet Single Control with Pull Out Spray 3 Position Faucet on sink 85940 Polished Chrome 4 From underside of sink, assemble Shank Mount Washer and Shank Mount Nut, then 85941 assemble Nuts to the Deck Plate Studs...
- Page 2 85940 / 85941 REPAIR PARTS ITEM NO. PART NO. DESCRIPTION 24632 ESSENCE LEVER HANDLE - PC 2463204 ESSENCE LEVER HANDLE - BN 85101 HANDLE SET SCREW 85102 INDEX BUTTON 85107W CARTRIDGE ASSEMBLY 85301 SPRAY WAND - PC 85302 SPRAY WAND - BN 85327 15/16"...
- Page 3 PRODUCT WARRANTY With the exception of items listed below, this product has a limited warranty against defects in materials or workmanship for a period of one year from the date of installation. Exceptions: 1.) Faucet stem cartridges have a limited warranty for a period of 100 years from date of manufacture. 2.) Product finishes have a limited warranty for a period of 100 years from the date of installation excluding oil rubbed bronze finishes.