Related Manuals for FOGE VL-BAL Series
Summary of Contents for FOGE VL-BAL Series
- Page 1 FÖGE ELEKTRONIK GMBH Böhleswasenweg 11 72555 Metzingen +49 7123 9570508 Instruction Manual Product: VL-BAL Series Long Bar Light Ver. 20.3.001...
-
Page 2: Intended Use
1. Intended Use VL-BAL Series Long Bar Light is designed for use in industrial areas. Purpose of the product is inspection of parts, code reading, OCR and other applications need to be illuminated directly or with angle. Light is positioned between part and camera.. -
Page 3: Dimensions / Installation
3. Dimensions / Installation System operation assumes knowledge of the assembly instructions. The symbols used for safety is shown in section 8(Safety) of manual. Camera VL-BAL Part Sample Applications Large area counting parts, cap Large area linescan Part positioning, existance, Large part positioning, applications, washing angle checking... -
Page 4: Electrical Connection
4.Electrical Connection 5. Display/Controls Product does not have this specification. Ver. 20.3.001... - Page 5 6. Faults In any case do not open the product. If the leds not on check the connection and power supply. If still leds are not on contact FÖGE or distributor. 7. Warnings • Connect the power supply and the display/output device according to the safety regulations for electrical equipment.
-
Page 6: Liability For Material Defects
8. Safety System operation assumes knowledge of the assembly instructions. The following symbols are used in these assembly instructions: Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a situation that may result in property damage if not avoided.