Page 1
Strela twin monitor arm Product code: DLB212 Installation guide Step one: Clamp installation Suggested desktop Thickness: 18-35mm Please select the appropriate mounting Tighten holes according to the thickness of desk Website: www.abl-uk.com Instruction sheet Tel: 01933 400 080 Email: sales@abl-uk.com...
Page 2
Make sure the screw is tight enough before handing the monitor Step three: Attaching VESA plate to monitor Tighten the screws Monitor Use the provided washers to secure screws, if required Tighten Website: www.abl-uk.com Instruction sheet Tel: 01933 400 080 Email: sales@abl-uk.com...
Page 3
Please check joint parts every two months and tighten screws where necessary. This product was designed to be installed on a desk. Before installing, make sure the mount will support the combined load of the equipment and hardware. Never exceed the Website: www.abl-uk.com Tel: 01933 400 080 Email: sales@abl-uk.com...