Rack-A-Tiers PIF-BE Instructions

Plugfones Bluetooth Wireless Instructions – Part # PIF-BE and PIF-UY
On & Off Instructions
Press and hold the multifunction button for two seconds to turn the unit on. The light will quickly flash red and
blue, then flash blue intermittently to indicate the unit is powered on. To power the unit off, press and hold the
multifunction button for three seconds. The light will flash red once while the unit is powering off.
Pairing Instructions
With the unit powered off, press the multifunction button for five seconds. The light will alternate flashing red and
blue while pairing. The light will quickly flash blue three times when successfully paired.
Charging Instructions
Fully charge your Plugfones before their first use. To charge the unit, plug the included USB charging cable into the
charging port on the controller module. Plug the other end of the cable into a USB-compatible wall charger or
computer USB port.
A solid red light indicates the unit is charging. A solid blue light indicates the unit is fully charged. When the batter
is low, the light will flash red once every minute.
Audio & Call Control
Volume: Quick-press the volume up or down buttons to adjust the volume. A noise prompt will indicate when
you've reached the maximum volume.
Play & Pause: Press the multifunction button to play. Press again to pause.
Previous Track: While listening, press and hold the volume down button for two seconds.
Next Track: While listening, press and hold the volume up button for two seconds.
Answer Call: As a call comes in, quick-press the multifunction button.
Reject Call: As a call comes in, press the multifunction button for one second.
End Call: During a call, press the multifunction button.
Redial: Double-click the multifunction button.