Page 1
441/451 Commercial DucTester QuickGuide Gauge case System case Umbilical DucTester Flex QuickGuides Extra tubing Range plugs DM32 20A gauge Tubing Battery Charger Accessory Kit Prepare the gauge, first time only If units on Channel A and B are NOT correct - Tap [Settings] >...
Page 2
Connect Flex to Fan Prepare the ducts Connect Flex Duct to fan outlet for Ensure sealing is complete pressurization Blank off ductwork airflow Outlet Inlet with Range Plugs On Model 451 you can depressurize ducts by attaching the Adapter onto Fan inlet and attaching the Flex to it Flex connects here...
Page 3
If your flow units include area, tap [Area], then use number pad to enter the area and tap [Set] Connect Gauge to a laptop and have FanTestic run the test according to any Standard visit www.retrotec.com/products/fantestic Run the test to download WARNING! Test pressures may exceed 20 in WC (5000 Pa).
Page 4
Tap [Channel B] and select“Pressure: Pa”. Additional troubleshooting Connect the yellow tube between the red and yellow ports. Visit www.retrotec.com/support for more support options such as FAQ, Webinars, Manuals, Tech If readings on Channel A and Channel B are Support, and Repairs.