Advertisement
Quick Links
Advertisement
Summary of Contents for CGOLDENWALL SH-10A
- Page 1 Drying moisture meter Operation manual...
- Page 2 Because of the dry cell temperature rises, the instrument above or around do not place combustible. Please be careful when remove the sample, because of the sample, the sample plate or other sample container was still hot. 2.The main technical parameter Model SH-10A DHS-16 DHS-16A DHS-20A Capacity...
- Page 3 3.3 adjustment 3.3.1 instrument in the start state. Screens closed until the touch screen The screen can display. 4. Operation 4.1 note (related to measuring accuracy) 4.4.1 moisture meter as a precision analysis instruments, users should carefully operation, the tested samples Should be spread evenly on the scale.
- Page 4 A. in the main menu interface touch calibration key Touch the clock calibration set the current date/time The final touch to confirm key, end Settings 4.3.4 drying temperature Settings The drying temperature can be set from 60 ℃ ~ 200 ℃. Steps are as follows: B.
- Page 5 one group, the latest parameters instead of its position. 4.3.8 print The water meter can be through the external micro printer test data or parameters of the sample under test. A. choose has set the parameters or sample that has been tested and save, touch the print button and print the parameters of the measured samples and test data.
- Page 6 8. Fault and solving methods Fault phenomenon Reason Resolution The display is not bright 1 Moisture meter not wired 1 Try to connect the up properly power supply 2 Moisture meter display 2 Turn on the meter switch is not open again or connect the 3 Sudden interference supply again...