Summary of Contents for In the Garage Ultimate Car Shield
Page 1
Ultimate Car Shield/Bike Shield What’s in the Box Big Box: Ultimate Car/Bike Shield Small Box: Accessories (see picture below) • Air Pump, Air Hose, Deflation Nozzle, Maintenance Nozzle • Pressure Tube & Pressure Adapter • Fans, Panel, AC Adapter & Plug •...
Page 2
Instructions Note: It should take about 20 minutes to set up the Ultimate Car Shield/Ultimate Bike Shield once unpacked. We recommend two people. Only products marked “Outdoor” are for use outdoors. All other products are for indoor use only! 1. Unfold the Ultimate Car/Bike Shield and place it where it will be located when inflated 2.
Page 3
7. Connect the electric cable to the Air Pump and plug it into an appropriate electrical outlet. For the Outdoor version, ensure that the power adapter and pump are placed inside the Ultimate Car Shield. 8. Turn on the Air Pump using the red 0/1 switch. It will run for less than 5 minutes or until the optimal...
Page 4
9. Install the Fans by placing the Velcro panel on the inside of the Ultimate Car/Bike Shield. Press hard 10. With the AC Adapter outside the device, run the power wire through the purpose-made slit and connect to Fan. (do not plug in an electrical socket yet as you first need to install the Filter) 11.
Page 5
12. Snap on the corresponding plug Adapter for your region onto the AC Adapter 13. Plug the AC Adapter in an appropriate electrical power socket 14. Outdoor version: Install the Fan Cover Support inside the hood above the fans 15. Outdoor version: Anchor the device to the ground (refer to Warnings & Care for more information) 16.
Page 6
Risk of suffocation/asphyxiation if persons are inside the device– do not leave children unattended. Do not leave your vehicle running in the device Do not use “Indoor Ultimate Car Shield/Bike Shield” outdoors Use gentle soap and water to clean the PVC...