Page 3
PRECAUTIONS READ this manual BEFORE operating or servicing the mounting KIT. FOLLOW these instructions carefully. SAVE this manual for future use. CAUTION: The installation and maintenance of this mounting KIT must be allowed to qualified personnel only. Pay attention during inspection, testing and adjustment. Failure to observe these precautions may be dangerous.
Page 5
DESCRIPTION The mounting KIT mod. MKX is supplied without the load cell but already assembled, ready to be mounted or further shipped. LEGEND Base Plate with 3 through holes for ground fixing Shearbeam load cell Load cells fixing bolts Ball-support accessory Load ball in tempered steel Upper Plate with 4 through holes for structure fixing Locking bolts for transportation...
MOUNTING INSTRUCTIONS 1. Use the mounting KIT already assembled as drilling template. Fix the structure to be weighed to the upper plate and fix the base plate to the ground. 2. Make all the mechanical connections and welding. At this point it is possible to fix the load cell with the ball and its support to the base plate and make the electrical connections.
Page 7
ORIENTATION OF WEIGHT MODULES 3 x 120° 120° 4 on diagonals Page 5 Page 5...
Page 8
PAVONE SISTEMI S.R.L. Via Tiberio Bianchi, 11/13/15, 20863 Concorezzo (MB) T 039 9162656 F 039 9162675 W en.pavonesistemi.it Industrial Electronic Weighing Systems since 1963...