Advertisement
Quick Links
TABLE COMPONENTS
INCLUDED HARDWARE
8x Washer
10x End Cap
1
Fasten each leg to tabletop
structure by installing 2
included washers and 2 lock
nuts through the holes at the
tabletop structure into the
bolts in the leg.
ASSEMBLY INSTRUCTIONS
SLT1 AND SLT2 with STRETCHERS AND BRACES
4x Rubber Boot
8x Lock Nut
14x Hammer Nut
TOOLS FOR ASSEMBLY
Tabletop
4x Legs
2x Braces
Stretcher
4x Bolt
2
Place the rubber boots in
each leg to protect them.
Drill
Allen Wrench
Wrench
8x Bolt
Advertisement
Related Manuals for National Public Seating SLT1
Summary of Contents for National Public Seating SLT1
- Page 1 ASSEMBLY INSTRUCTIONS SLT1 AND SLT2 with STRETCHERS AND BRACES TABLE COMPONENTS TOOLS FOR ASSEMBLY Tabletop Drill 4x Legs 2x Braces Allen Wrench Stretcher 4x Rubber Boot Wrench INCLUDED HARDWARE 8x Washer 10x End Cap 8x Lock Nut 14x Hammer Nut...
- Page 2 ASSEMBLY INSTRUCTIONS SLT1 AND SLT2 STRETCHERS AND BRACES Insert 2 hammer nuts into the Fasten each end of the brace 2 holes at both ends of each to each leg by installing 2 of brace. Make sure to align the larger included bolts...