PACKAGE CONTENTS
A - Low Voltage Recessed Cable Plate
B - Old Work Electrical Box
CAUTION
Before installing this product, be sure the electrical power is off at the circuit
breaker or remove fuse(s).
Installation
1
DETERMINE THE PLATE LOCATION
□
Use the stud nder to center between the wall framing
studs.
□
Be sure to frame your plate both vertically and
horizontally
Up to 7'
Outlet
Height or
18"
*This product is designed for standard 2x4 framed walls. If your
wall does not have the standard 3.5" spacing between the drywall
you will need to use a kit that mounts on the front of the wall.
ETL LISTED
CONFORMS TO
UL STD. 514C
CERTIFIED TO
3026001
CAN/CSA STD. C22.2#42.1:200-1
Low Voltage Recessed Cable Plate w/ Duplex Receptacle
C - 15 Amp/125 Volt Tamper Resistant
Receptacle
D- Four (4) Screws
Up to 6'
RoHS Compliant
This product is patent protected by
U.S. Patent number: 0553475 & 7390964
Installation Guide
TOOLS NEEDED
#2 Phillips Head Screwdriver
Stud Finder
Drywall Saw
For video information visit
homedepot.com and search SKU
641134 or model number 5310-WH
2
PREPARING THE WALL FOR INSTALLATION
□
Using the template supplied, trace the opening for the low voltage recessed
cable plate on the wall. Remember, the plate is designed to be mounted centered
between the studs.
TIP: Loop a piece of tape with the sticky side outward to form a circle and
apply it to the back of the template to secure it to the wall.
3
CUT DRYWALL FOR LOW VOLTAGE CABLE PLATE
□
Using a drywall saw, cut a hole in the drywall the size of the template.
Item # 641134
Model #5310-WH
Level
Pencil
Tape
Scan Me
TEMPLATE
Rev. 01/29/2019