Download Print this page

Gemmy FLEXTECH light string Instructions

Advertisement

Quick Links

Congratulations!
tions carefully before use.
SAFETY WARNING:
be discarded.
SAVE THESE INSTRUCTIONS –
tions for power units.
WARNING
ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used
in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. lf one is not provided,
contact a qualified electrician for proper installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
7. This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with
or placed where small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
11. Do not cover the product with cloth, paper or any material not part of the product when in use.
12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the
product. Replace the fuse as per the user servicing instructions(follow product marking for proper fuse rating)and check the
product. lf the replacement fuse blows, a short-circuit may be present and the product should be discarded.
13. Read and follow all instructions that are on the product or provided with the product.
CAUTION:
To reduce the risk of fire and electric shock:
1. Do not install on trees.
2. Do not mount on support strings in a manner that can cut or damage wire insulation.
3. Do not remove light string off the product and hang on other places for decoration.
SAVE THESE INSTRUCTIONS.
F LE X T E C H™
IN S T RU CT IONS
You are now the proud owner of a FlexTech™ light string. Please read the direc-
Remove all plastic fasteners and tags. These are part of the packaging and should
This manual contains important safety and operating instruc-
1

Advertisement

loading

Summary of Contents for Gemmy FLEXTECH light string

  • Page 1 F LE X T E C H™ IN S T RU CT IONS Congratulations! You are now the proud owner of a FlexTech™ light string. Please read the direc- tions carefully before use. SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
  • Page 2 USE AND CARE INSTRUCTIONS 1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. 2. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress on the product conductors, connections, and wires.
  • Page 3 ASSEMBLY INSTRUCTIONS 1. Gently uncoil the FlexTech™ light string from the package.(see illustration 1) 2. Use the included multi-purpose clip to mount the light string. The multi-purpose clip can be used on your gutters (see illustration 2), shingles (see illustration 3), or nailed to a flat surface (illustration 4) by removing the upper half.
  • Page 4 THESE INSTRUCTIONS ARE FOR THESE ITEM NUMBERS 44205 44285 87081 Visit for more information. WWW.GEMMY.COM ©2014 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE. SUITE 100 COPPELL, TX 75019 U.S.A. 1 (877) 250-9032 MADE IN CHINA / PRINTED IN CHINA...

This manual is also suitable for:

442054428587081