Advertisement
Quick Links
QUICK START: B402
The Particle B402 is a mesh and Bluetooth development kit designed for building
connected projects and products. To set up the device you'll need an Android or
iOS mobile phone and a connection to the internet.
PRODUCT
MODEL NAME
NOMINAL VOLTAGE
OPERATING
TEMPERATURE
RANGE
MODULATION TYPE
TX OPERATING
FREQUENCY
ANTENNA GAIN
B Series B402
B402,B402S
Li+ PIN /Battery connector: DC 3.7V from Li-ion Battery or
VUSB PIN /USB connector :DC 5V from USB Host Unit
-20 ~ 75℃
LTE/BLE
QPSK&16QAM, GFSK(1MHz, 2MHz)
1850.7MHz ~ 1909.3MHz (FOR LTE Band2)
1710.7MHz ~ 1754.3MHz (FOR LTE Band4)
824.7MHz ~ 848.3MHz (FOR LTE Band5)
LTE/BLE
699.7MHz ~ 715.3MHz (FOR LTE Band12)
779.5MHz ~ 784.5MHz (FOR LTE Band13)
2402MHz ~ 2480MHz (FOR BLE)
LTE Band 2
FPC Antenna with 3.5dBi gain
LTE Band 4
FPC Antenna with 3.5dBi gain
LTE Band 5
FPC Antenna with 1.0dBi gain
LTE Band 12 FPC Antenna with 1.0dBi gain
LTE Band 13 FPC Antenna with 1.0dBi gain
BLE
FPCB Antenna with 2.0dBi gain
Advertisement
Summary of Contents for Particle B Series
- Page 1 QUICK START: B402 The Particle B402 is a mesh and Bluetooth development kit designed for building connected projects and products. To set up the device you'll need an Android or iOS mobile phone and a connection to the internet. B Series B402...
- Page 2 NOTES: 1.) If you have already set up your B402, skip to Step #2. 2.) During set up you may skip setting up a Particle Mesh network and use the Xenon in a standalone mode. 2. Open the Web IDE To program your B402, open a new browser tab and go to the IDE.
- Page 3 If you're looking for a more traditional embedded development experience, be sure to learn about [Particle Workbench], a full toolchain integration with Microsoft Visual Studio Code. 3. Load the Blink example Click on Blink an LED on the left side of the page. As soon as you click the Blink and LED code will load and fill the screen as shown below.
- Page 4 Click the lightning bolt icon on the top left of your screen to flash your code to your device. As soon as you click, the Particle Device cloud will compile the program source code to a binary file and send it over-the-air (OTA) to your Argon.
- Page 5 FCC Statement This device complies with Part 15/22/24/27 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 6 Industry Canada statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.