Advertisement
Quick Links
Central Unit C4 Elypse
1) SAFETY INFORMATION
A central unit is a device for controlling and monitoring the work of all sensors that are connected to it, which protect merchandise on open display. A central unit is a
technologically advanced device, which has been designed with a view to be easily controlled and upgraded. In order to optimally use functions of a central unit one has to
adhere to the instruction manual and follow the safety indications, such as:
- do not expose a central unit to mechanical shock
- do not store a central unit in wet areas
- do not store a central unit in high temperature areas
- protect a central unit from dust
- Secu -
A sensor protects a product mechanically (e.g. a switch or screw). This standard works properly with central units C4 Elypse (Secu/Power v2.2, ECO Secu/IQ v1.1).
A sensor protects a product mechanically (e.g. a switch or screw) as well as charges with 5V/0,5A. This standard works properly with central units C4 Elypse
- USB Standard -
(Power)
A product is protected mechanically (e.g. a switch or screw) and charged with 5V/2A or 12V/1A. This standard works properly with central units
- IQ -
- IQ SMART -
A product is protected mechanically (e.g. a switch or screw) and electronically via micro USB port. Charging of a product takes place with 5V/2A or 12V/1A. This
standard works properly with central units
2) DESCRIPTION OF C4 ELYPSE CENTRAL UNITS
C4 Elypse Secu/IQ/Power:
1. Red LED indicating that the central unit's alarm is triggered (6 szt.).
2. Green LED indicating that the central unit is armed.
3. Yellow LED indicating that the signal from the remote control is received and the central unit is armed.
4. IR receiver.
5. High quality stickers enable to attach the product firmly.
6. A DC cable for connecting an external power supply.
7. A „Reset" button enables to add and delete remote controls from the memory of the central unit.
8. Buzzer.
9. Ports for connecting protective sensors.
1
2
Optiguard sp. z o.o.
ul. Aleksandrowska 6-10, 87-100 Toruń
NIP 956-213-03-91
Phone +48 56 654 71 33
User Manual for
C4 Elypse (Power, IQ).
5
4
3
USER MANUAL
6
7
8
9
C4 Elypse (Power, IQ).
1 / 5
Advertisement
Summary of Contents for Optiguard C4 Elypse
- Page 1 A sensor protects a product mechanically (e.g. a switch or screw). This standard works properly with central units C4 Elypse (Secu/Power v2.2, ECO Secu/IQ v1.1). A sensor protects a product mechanically (e.g. a switch or screw) as well as charges with 5V/0,5A. This standard works properly with central units C4 Elypse...
- Page 2 CAUTION!!! If a remote control stops working or starts working improperly one has to send it back to OPTIGUARD® for repair. It is explicitly forbidden to open a remote control’s casing and mess with its components throughout the whole warranty period.
- Page 3 Even though two charging cables may look identical, it is forbidden to mix them between various types of charging cables. Each charging cable is dedicated to a specific type of sensor. OPTIGUARD® does not bear responsibility for causes resulting from not adhering to the above guideline. Optiguard sp. z o.o.
- Page 4 The central unit will turn into the armed mode. The yellow LED (Disarmed) will turn off and the green LED (Armed) will start blinking, whereas the port which the cable has been connected to will start blinking green, which means that the system works properly. Optiguard sp. z o.o. ul. Aleksandrowska 6-10, 87-100 Toruń...
-
Page 5: Technical Support
While changing the merchandise on display one has to also replace stickers. In case there is a necessity to replace the sticker on the sensor one has to use only OPTIGUARD® stickers dedicated to specific types of sensors. One has to remove the old sticker and clean the surface of the sensor. One has to attach the sticker in such a way, so that the switch on the sensor freely protrudes through the hole in the sticker.