olympia electronics KLD-30 Quick Start Manual

Legend installation-replacement
KLD-22 & KLD-30
1 2
KLR-20
1 2
NOTE: LED= Light Emitting Diode
LABELING EXPLANATION:
X: Self contained
1: Maintained (*)
A: Including test device
E: With non-replacable lamp(s) and/or battery
G: Internally illuminated safety sign
180: 3 hours duration
(*) Maintained operation: The luminary lights its illumination source, when it is
powered by the mains power supply or not.
Non Maintained operation: The luminary lights its illumination source, only in
power supply's failure.
ATTENTION!!!
The light source of this luminary is not replaceable when the light source
reaches its end of life the whole luminary shall be replaced.
4
Technical Characteristics
MAINS VOLTAGE
MAXIMUM POWER CONSUMPTION
BATTERY (Ni-Cd)
BATTERY PROTECTION
INDICATIONS
RECHARGING TIME
MINIMUM EMERGENCY DURATION
LIGHT SOURCE INTENSITY (230V / EMERG.)
VIEWING DISTANCE
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
CONSTRUCTION MATERIALS
EXTERNAL DIMENSIONS (LXWXH)
TYPICAL WEIGHT
GUARANTEE
MANUFACTURER
MODEL NUMBER
VOLTAGE RANGE
NOMINAL POWER
CONNECTIONS
TEMPERATURE (tc)
Olympia Electronics guarantees the quality, condition and operation of the goods. The
period of warranty is specified in the official catalogue of Olympia Electronics and also in
the technical leaflet, which accompanies each product. This warranty ceases to exist if
the buyer does not follow the technical instructions included in official documents given
by Olympia Electronics or if the buyer modifies the goods provided or has any repairs or
re-setting done by a third party, unless Olympia Electronics has fully agreed to them in
writing. Products that have been damaged can be returned to the premises of our
company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to
or not charge the buyer depending on the reason of defection. Olympia Electronics
reserves the right to charge or not the buyer the transportation cost.
72nd km. O.N.R. Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
5
922502050_09_008
KLD-30 KLD-22 KLR-20
220-240V AC / 50-60Hz
3.2W / 3.4VA
3.6V/1 Ah
Overcharging and deep discharging protection
Charge LED/ Test button
24 hours
3 hours
75lm/75lm
30m 22m 20m
IP54
EN 60598-1, EN 60598-2-22, EN 55015,
EN 61547, EN 61000-3-2, EN 61000-3-3
o
5 to 40 C
up to 95%
PC, Acrylic plate PC
310x35x216mm 254x35x180mm 254x35x170mm
920gr. 700gr. 520gr.
3 years (1 year for the battery)
LED Characteristics
KLD-30 KLD-22 KLR-20
Olympia Electronics S.A.
0405183
11.2-13.2V DC
0.72W
Built-in main board
45 °C max. across the board
Warranty
www.olympia-electronics.gr
info@olympia-electronics.gr
922502050_09_008
European
manufacturers
KLD-22 KLD-30
KLR-20
KLD-30, KLD-22, & KLR-20
MAINTAINED EMERGENCY ILLUMINATION SIGNS
M
Duration
Light output
Maintained
30m 22m
IP54
3h 75lm
Thank you for your trust in our products
Olympia Electronics - European manufacturer
20m