CyberPower CP685AVR User Manual

CP685AVR / BF685
CP800AVR / BF800
User's Manual
IMPORTANT SAFETY WARNINGS
(SAVE THESE INSTRUCTIONS)
This manual contains important safety instructions. Please read and follow all instructions carefully during installation
and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate your UPS.
CAUTION!
To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free
of conductive contaminants. (Please see specifications for acceptable temperature and humidity range).
CAUTION!
To reduce the risk of electric shock, do not remove the cover except to service the battery. No user
serviceable parts inside except for battery.
CAUTION!
Hazardous live parts inside can be energized by the battery even when the AC input power is
disconnected.
CAUTION!
UPS must be connected to an AC power outlet with fuse or circuit breaker protection. Do not plug into an
outlet that is not grounded. If you need to de-energize this equipment, turn off and unplug the unit.
CAUTION!
To avoid electrical shock, turn off the unit and unplug it from the AC power source before servicing the
battery or installing a computer component.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!
products for life support or medical applications.
of any life support equipment or with any medical applications or patient care.
DO NOT USE WITH OR NEAR AQUARIUMS!
an aquarium. Condensation from the aquarium can cause the unit to short out.
CAUTION!
To reduce the risk of fire, only connect the UPS to a circuit provided with 20 amperes maximum branch
circuit overcurrent protection in accordance with the National Code, ANSI / NFPA 70.
INSTALLING YOUR UPS SYSTEM
UNPACKING
Inspect the UPS upon receipt. The box should contain the following:
(1) UPS unit; (1) User's manual; (1) PowerPanel™ Personal Edition software CD; (1) USB device cable; (1) Telephone
cable; (1) Warranty registration card; (1) Coaxial Cable
WHAT IS AVR?
The CP685AVR / BF685 CP800AVR / BF800 provide complete power protection from
utility power that is not always consistent. The CP685AVR / BF685 CP800AVR /
BF800 features 890 Joules of surge protection, and provide long lasting battery
backup with sealed maintenance free lead acid battery for loss of utility power and
voltage sags. The CP685AVR / BF685 CP800AVR / BF800 ensure consistent power
to your computer system and include software that will automatically save your open
files and shutdown your computer system during a utility power loss.
AUTOMATIC VOLTAGE REGULATOR?
The CP685AVR / BF685 CP800AVR / BF800 stabilize utility power voltage levels that can be inconsistent. The incoming
utility power may be damaging to important data files, but with Automatic Voltage Regulation, the computer will only not
experience damaging voltage levels. An Automatic Voltage Regulator automatically increases low or decreases high
voltage to a consistent, computer safe 110v/120v. The unit's powerful battery will provide
power only if the incoming voltage drops below 90v or increases above 140v.
HARDWARE INSTALLATION GUIDE
1. Your new UPS may be used immediately upon receipt. However, recharging the
batteries for at least 16 hours is recommended to insure that the battery's maximum charge capacity is achieved. A
loss of charge may occur during shipping and storage. To recharge the batteries, simply leave the unit plugged into an
AC outlet and turn on the power switch.
2. With the UPS unit off and unplugged, connect your computer, monitor, and any externally powered data storage
device (Zip drive, Jazz drive, Tape drive, etc...) into the battery power supplied outlets. Plug your
peripheral equipment (printer, scanner, speakers) into the full-time surge protection outlets. DO NOT
plug a laser printer, paper shredder, copier, space heater, vacuum or other large electrical
device into the UPS. The power demands of these devices will overload and possibly damage the unit.
3. To surge protect a network connection, connect a network cable from the wall jack outlet to the IN jack of the UPS.
Then connect a network cable from the OUT jack on the UPS to the network device.
4. Plug the UPS into a 2 pole, 3 wire grounding receptacle (wall outlet). Make sure the wall branch outlet is protected by
a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. refrigerator, copier, etc...).
The warranty prohibits the use of extension cords, outlet strips, and surge strips.
5. Press the power switch to turn the unit on. The power on indicator light will illuminate and the unit will "beep" once.
6. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To correct this, turn the
UPS off and unplug at least one piece of equipment from the battery power supplied outlets. Wait 10 seconds. Make
sure the circuit breaker is depressed and then turn the UPS on.
7. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.
8. To store your UPS for an extended period, cover it and store with the battery fully charged. While in storage recharge
the battery every three months to insure battery life.
BASIC OPERATION
DESCRIPTION
1 Battery and Surge Protected Outlets
The unit has four battery powered/surge protected outlets for connected equipments and
5
6 6
2 2
6 6
ensures temporary uninterrupted operation of your equipment during a power failure.
9 9
2 Full-Time Surge Protection Outlets
11 11
The unit has four always on surge suppression outlets.
9 9
7 7
8 8
3 Power Switch
8 8
1
1
10
Can be used as a master on/off switch for equipment connected to the battery power
3
4
supplied outlets.
4 Power On Indicator
This LED is illuminated when the utility condition is normal and the UPS outlets are providing power, free of surges.
5 Electrical Wiring Fault Indicator
This LED indicator will illuminate to warn the user that a wiring problem exists, such as bad ground, missing ground or reversed
wiring. If this is illuminated, user is advised to disconnect all electrical equipment from the outlet and have an electrician check to
ensure the outlet is properly wired. The unit will not provide surge protection without being plugged into a grounded and properly wired
wall outlet.
6 Communication Protection Ports
Communication protection ports will protect any standard modem, fax, telephone line, broadband network or Ethernet connection.
7 Circuit Breaker
Located on the side of the UPS, the circuit breaker serves to provide overload-- and fault protection.
8 Serial/USB Ports to PC
The ports allow connection and communication from the USB or DB-9 serial port on the computer to the UPS unit. The UPS
communicates its status to the PowerPanel™ Personal Edition software. This interface is also compatible with Power Management
provided by Windows R 2000 and Windows R XP.
CyberPower Systems does not sell
DO NOT
use in any circumstance that would affect operation or safety
To reduce the risk of fire or electric shock, do not use with or near
Automatic Voltage Regulators
increase low or decrease high voltage to computer
safe 110/120 volts. The AVR automatically provides
battery back-up power if line voltage drops below 88
volts or exceeds 140 volts.
INCONSISTENT
UTILITY POWER
PLUG IN
Note: Only one of these two ports can be used to communicate with your computer at one time.
Note: To install PowerPanel™ Personal Edition Software the computer will need Microsoft
Explore 5.0 or higher installed.
Note: If using the Serial Port, users need to download Power Panel
http://www.cyberpowersystems.com and order the standard serial cable. If you have any questions email
CyberPower technical support for help. tech@cyberpowersystems.com
9 Outlets Designed for AC Adapters
The unit has four outlets spaced to allow AC power adapter blocks to be plugged into the UPS without blocking adjacent outlets.
10 Vertical Use Stand
K01-BF80001 The unit can be placed on it's end in a vertical orientation.
Note: We recommend you place the unit next to the wall when standing the unit vertically.
11 Coax/Cable/DSS Surge Protection
The Coax/Cable/DSS surge protection ports will protect any cable modem, CATV converter, or DSS receiver.
REPLACING THE BATTERY
CAUTION!
Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery. Service the
battery under the supervision of personnel knowledgeable of batteries and their precautions.
CAUTION!
Use only the specified type of battery. See your dealer for replacement batteries.
CAUTION!
The battery may present a risk of electrical shock. Do not dispose of battery in a fire as it may explode.
Follow all local ordinances regarding proper disposal of batteries. Almost any retailer that sells lead-acid batteries
collects used batteries for recycling, as required by most state laws.
CAUTION!
Do not open or mutilate the batteries. Released electrolyte is harmful to skin and eyes and may be toxic.
CAUTION!
A battery can present a high risk of short circuit current and electrical shock. Take the following precautions
before replacing the battery:
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.
3. Do not lay tools or metal parts on top of battery or any terminals.
4. Wear rubber gloves and boots.
5. Determine if the battery is inadvertently grounded. If grounded, remove the source of ground. CONTACT WITH
GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK!
TO REPLACE THE BATTERY
1. Turn off and unplug all connected equipment.
2. Turn the UPS off and unplug it from the AC power source.
3. Turn the UPS upside down.
4. Remove the 1 retaining screw.
5. Slide the battery compartment cover completely off of the unit.
6. Remove the battery from the compartment.
7. Disconnect the battery wires from the battery.
8. Install the replacement battery by connecting the red wire and black wire to the positive (+) and negative (-) terminal
of the battery.
9. Put the battery back into the compartment.
10. Slide back the battery compartment cover and tighten the retaining screw.
11. Recharge the unit for 4 – 8 hours to fully charge the battery.
REMINDER: Batteries are consider HAZARDOUS WASTE and must be disposed of properly. Almost any retailer that
AVR sells lead-acid batteries collects used batteries for recycling, as required by most state laws.
CONSISTENT
SAFE POWER
Problem
. Full-time surge protection outlets
stop providing power to equipment.
Circuit breaker button is projecting
from the side of the unit.
The UPS does not perform
expected runtime.
The UPS will not turn on.
IN OUT
PowerPanel™ Personal Edition
is inactive (all icons are gray).
Model
Capacity
Input Voltage on Utility
Input Frequency
On-Battery Output Voltage
Transfer Time
Max. Load for UPS Outlets (4 Outlets)
Max. Load for Full-Time
Surge Protection outlets (8 Outlets)
On-Battery Output Wave Form
Operating Temperature
Operating Relative Humidity
Size (L x W x H)
Net Weight
Typical Battery Recharge Time
Typical Battery Life
Battery Type
Safety Approvals
R software from our website
TROUBLE SHOOTING
TROUBLE SHOOTING
Possible Cause
Circuit breaker has tripped Turn the UPS off and unplug at least one piece of equipment.
due to an overload. Wait 10 seconds, reset the circuit breaker by depressing the
button, and then turn the UPS on.
Battery not fully charged.
Recharge the battery by leaving the UPS plugged in.
Contact CyberPower Systems about replacement batteries at
Battery is slightly worn out.
tech@cyberpowersystems.com
The on/off switch is designed
Turn the UPS off. Wait 10 seconds and then turn the UPS on.
to prevent damage by rapidly
turning it off and on.
The unit is not connected to
The unit must be connected to a 110/120v 60Hz outlet.
an AC outlet.
Contact CyberPower Systems about replacement batteries at
The battery is worn out.
tech@cyberpowersystems.com
Contact CyberPower Systems at
Mechanical problem.
tech@cyberpowersystems.com
Connect the USB / serial cable to the UPS unit and an open
The USB / serial cable is not
USB / serial port on the back of the computer. You must use
connected.
the cable that came with the unit.
The USB / serial cable is Check the back of the computer for an additional USB / serial
connected to the wrong port. port. Move the cable to this port.
The unit is not providing Shutdown your computer and turn the UPS off. Wait 10
battery power. seconds and turn the UPS back on. This should reset the unit.
The serial cable is not the If you are using a serial cable you must use a CyberPower
cable that was included with serial cable. If you need this cable please contact technical
the UPS unit. support. tech@cyberpowersystems.com
Additional troubleshooting information can be found at
www.cyberpowersystems.com/support.htm
TECHNICAL SPECIFICATIONS
CP685AVR / BF685
685VA / 390W
90V to 140V
57 Hz to 63 Hz
120Vac ± 5%
4ms Typical
685VA / 390W
12 Amps
Simulated Sine Wave Form
+ 32°F to 95°F / 0°C to 35°C
0 to 95% NON-CONDENSING
1 " 1 x 6 / 5 " 8 x 3 1 2 / / " 2 8
13.7 lbs
8 hours typical from total discharge
3 to 6 years, depending on number of discharge/recharge cycles
Sealed Maintenance Free Lead Acid Battery
UL1778(UPS), cUL107., FCC/DoC Class B
R Internet
Solution
CP800AVR / BF800
800VA / 450W
800VA / 450W
c m x 1 6 9 . c m x 8 7 . c m
14.3 lbs