HiB Globe 45 Quick Start Manual

This product is suitable for installation in zones:
&
2 Outside Zone
All installations must comply with guidelines which are based on a zonal
concept. The diagram above illustrates this concept and must be followed
to ensure the safe installation of electrical appliances in the bathroom.
These regulations apply to domestic installations only. Installations must be
made in accordance with the current IEE wiring regulations and relevant
building regulations. HiB recommends that all electrical bathroom
products should only be fitted by a suitably qualified, Part P registered
electrician.
Installation
1. Position the mirror in a suitable location (according to the zonal
diagram - Fig. 1), ensuring that the domestic electrical mains
supply is within reach of the electrical entry point of the product.
2. Carefully mark the position of the mirror using a soft pencil
ensuring it is level. Remove the mirror and mark the mounting
points. Please ensure that all marked mounting points
accurately match up with the fixing points on the mirror.
3. Using a suitable drill bit, drill holes in the marked positions to a
suitable depth. If drilling through tile, use a ceramic drill bit.
4. Insert wall plugs level with the surface of the wall. If fitting to a
tiled surface, wall plugs should be inserted below the tile surface
to avoid cracking. NB. For plasterboard walls, specialist fixings
should be purchased, available from any DIY or hardware store.
5. Screw supplied fixings into wall plugs.
6. Ensure the domestic electrical mains supply to which the
mirror is being connected is turned off. Connect the domestic
mains supply to the terminal box according to the wiring diagram
overleaf (Fig. B).
7. Hang the mirror in position.
8. Switch the domestic electrical mains supply for the mirror back
on.
Operation Instructions
To turn illumination on or off, wave hand under the sensor switch
located at the bottom of the mirror.
Heated Pad is only on when mirror is illuminated.
T: +44 (0)20 8441 0352 F: +44 (0)20 8441 0219
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
Illuminated Mirrors
Globe 45
Globe 60
Sonic Art No. 77430000
Orb 60
Zircon 60
Fleur Art No. 77440000
Fahrenheit 60
Fahrenheit 80
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them
(Fig. 1)
during installation to ensure that your product is fitted safely and that it
retains its high quality finish.
Please retain this leaflet for future reference.
Before installation, ensure the domestic electrical mains supply to
which the mirror is to be connected is turned off. Before drilling,
ensure that there are no hidden cables or pipes in the wall.
Mounting Points Diagram (Fig. A)
Fahrenheit 50
Fahrenheit 60
Fahrenheit 80
NB. These products must be installed with a minimum distance of 150mm
between the infra-red sensor switch and any adjacent wall or object to
ensure correct operation of the sensor.
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a soft, damp cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB
customer services, details shown below.
E: sales@hib.co.uk hib.co.uk
Art No. 78400000 / Globe 50
Art No. 78600000 / Globe 120
/ Orb 50
Art No. 78650000 / Zircon 50
Art No. 77610000 / Zircon 80
/ Fahrenheit 50
Art No. 77490000
Art No. 77500000
Globe 45
Globe 50
Globe 60
Globe 120
Orb 50
Orb 60
Sonic
Fleur
Zircon 50
Zircon 60
Zircon 80
FI#01 002 R150909
Art No. 78500000
Art No. 78700000
Art No. 78550000
Art No. 77600000
Art No. 77620000
Art No. 77480000
Hanging landscape
REAR VIEW
mounting points
REAR VIEW
mounting points
Ver No. 1.0 Jan 2016