Download Print this page

Breezaire WKC Series Installation Instructions

Breezaire cooling unit installation instructions

Advertisement

Quick Links

l
l
l
8610 Production Avenue
San Diego, California 92121
(858) 566-7465
Fax (858) 566-1943
WKC SERIES
(USA Only)

--INSTALLATION INSTRUCTIONS--

Thank you for choosing a BREEZAIRE cooling unit. We believe our products are the best
on the market and will provide many years of trouble free service.
Please take a few minutes and read the entire instruction before beginning the installation.
Before removing the cooling unit from the box, please inspect for damage, which might have
occurred during shipping. If damage is found, notify the Freight Company immediately.
BREEZAIRE is not responsible for any damages during shipping.
MODEL
. SERIAL NUMBER
.
INSTALLED BY
. DATE
.
While great effort has been made to provide accurate guidelines,
BREEZAIRE
cannot warrant its units to properly cool a particular enclosure. Customers are cautioned that
enclosure construction, unit location and many other factors can affect the operation and performance of the unit. Therefore the suitability of the unit for a specific enclosure or
application must be determined by the customer and cannot be warranted by
BREEZAIRE.
BREEZAIRE Products Company - 8610 Production Avenue - San Diego, CA USA 92121 - (858) 566-7465

Advertisement

loading

Summary of Contents for Breezaire WKC Series

  • Page 1: Installation Instructions

    Therefore the suitability of the unit for a specific enclosure or application must be determined by the customer and cannot be warranted by BREEZAIRE. BREEZAIRE Products Company - 8610 Production Avenue - San Diego, CA USA 92121 - (858) 566-7465...
  • Page 2: Enclosure Construction Guidelines

    FOR WKC SERIES COOLING UNITS The BREEZAIRE WKC Series cooling units are designed to, when installed in a properly constructed enclosure, provide a constant, selectable temperature between 48°F and 62°F while reducing the excess relative humidity to the proper 50% to 75%. BREEZAIRE cooling units are designed to lower the temperature, while removing only excessive moisture.
  • Page 3: Installation

    The BREEZAIRE WKC series cooling units were designed and engineered for cabinets and credenzas. However if you have looked at the BREEZAIRE WK series cooling unit and you feel the WKC series units will better serve your application you must follow theses specifications: This is a mechanical piece of equipment, it will make noise and produce heat on the warm side exterior grille (Fig.
  • Page 4: Operation

    Inappropriate locations for the warm air exhaust includes unventilated laundry rooms, closet, bathrooms, garages, crawl spaces, attics and humid basements. Make sure that the warm air exterior grille can be properly attached to the unit (see Fig. 3). Make a hole through the wall as illustrated in Fig. 2. This unit is to be installed above floor level, construct a shelf as shown in Fig.
  • Page 5: Maintenance

    BREEZAIRE is extremely proud of the quality and reliability of its products. Experience has shown that of the small number of problems encountered, the large majority are due to improper unit selection or enclosure construction.

This manual is also suitable for:

Wkc1060Wkc2200Wkce1060Wkce2200