Advertisement
Quick Links
General Description
The WH2630 and WT2630 are battery operated spread spectrum wireless wall humidity temperature sensors
housed in a rugged enclosure.
ACI's mesh network Series 2000 wireless sensors utilize reliable Spread Spectrum Radio technology. They can
be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing
installation labor risks.
The Series 2000 sensor Data-Link LED confirms the data transmission was received by the receiver for fast and
reliable positioning of the sensor during installation. There is no need for special wireless installation equipment
or tool.
Together with the ACI Series 2000 receivers and controllers, the ACI wireless sensors can be used with any
LON, BacNet, MODbus, or DDC control system or panel.
The maximum radio transmission distance is dependent on the building type.
transmission distance is one mile. In a typical commercial building with steel I-Beam construction, concrete
floors with reinforcing rod, and metal stud walls, it can be expected that transmissions will penetrate vertically
through floors and horizontally through 200 to 300 feet of walls, furniture and air.
AUTOMATION COMPONENTS, INC
2305 Pleasant View Road
Middleton, Wisconsin 53562
www.workaci.com
(888) 967-5224
Humidity and Temperature Wall Sensors
4.25"
(107.95mm)
Installation and Operation Instructions
WH2630AR/P, WT2630AR/P,
1.26"
(32mm)
Page 1 of 4
& BR/P Wireless
2.625"
(66.68mm)
1.26"
(32mm)
The maximum open air
Version : 4.0
I0000685
Advertisement
Related Manuals for aci WH2630AR/P
Summary of Contents for aci WH2630AR/P
- Page 1 There is no need for special wireless installation equipment or tool. Together with the ACI Series 2000 receivers and controllers, the ACI wireless sensors can be used with any LON, BacNet, MODbus, or DDC control system or panel.
- Page 2 Installation Wireless sensors should be installed within 200 to 300 feet of the receiver. RR2552 signal repeaters can be installed as to increase transmission distance between sensors and receivers. CAUTION Observe battery polarity when installing battery. To select the proper sensor location, first install and power the receiver. To activate the sensor insert the battery observing the polarity.
- Page 3 0 to 95% RH (non-condensing) WARRANTY SPECIFICATION The ACI Wireless Series is covered by ACI’s Two (2) Year Limited Warranty, which is located in the front of ACI’S SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s web site: www.workaci.com.
- Page 4 WH2630ARP / WH2630BRP / WT2630AR/P External Link Button Top View AUTOMATION COMPONENTS, INC Version : 4.0 2305 Pleasant View Road I0000685 Middleton, Wisconsin 53562 Page 4 of 4 www.workaci.com (888) 967-5224...