Download Print this page
EAST COAST MERLIN BLUE BUTTON Coding Instructions

EAST COAST MERLIN BLUE BUTTON Coding Instructions

Remote handset

Advertisement

Quick Links

REMOTE HANDSET CODING INSTRUCTIONS: MERLIN
GREEN BUTTON & GREEN BUTTON MINI (433MHz)
C945 & E945M (BEAR CLAWS), C940 & C943
BLUE BUTTON HANDSET (DIP SWITCH -40.685MHz): TO CODE YOUR NEW REMOTE
USING THE MOTOR PANEL:
1. Ensure your new battery is installed correctly in the new remote.
2. Remove the light cover from the CONTROL BOX (MOTOR) to access the control panel.
3. Remove the small rectangular plastic cover on the control panel to access the 12 small 'dip switches'.(refer
diagram 1 overleaf)
4. Set the position of the 12 dip switches on your new remote control to identically match the position of those on the
motor. (e.g. if number one switch on your motor is in the up position, put the number one switch on the remote in
the up position) (refer diagram 2 overleaf)
5. If for any reason you want to change or re-set the dip switches to a different combination on the motor, you will
also need to change all of the remote controls to match the motor.
GREEN BUTTON HANDSET &, GREEN BUTTON MINI HANDSET (433MHz): TO CODE YOUR NEW REMOTE USING
THE MOTOR PANEL:
1. Remove the light cover from the CONTROL BOX (MOTOR). Remove the control panel cover to identify the set
up controls. Identify the 'LEARN' button and the 'SETUP' button.
2. Press the LEARN button for 1-2 seconds, until the courtesy lamp begins to flash slowly.
3. Press the desired remote button for control of the opener, wait 1 second, pres the desired remote button again.
The courtesy lamp will stop flashing once learning is complete.
To delete all remote controls from the openers memory: press and hold the 'SETUP' button on the control panel for 11
seconds until the courtesy lamp stops flashing. After 6 seconds the lamp with flash fast as a warning, if you release
the setup button during this warning period then the memory will not be wiped.
Thank you for your purchase.
Our Customer Support team are available 8am-5pm on (07) 5476 9227 if you have any further questions.
BLUE BUTTON (DIP SWITCH)
ATF The East Coast Trust trading as
EAST COAST GARAGE DOORS & GATES
"Transform Your Entrance"
P.O. Box 8125 MAROOCHYDORE DC QLD 4558
www. eastcoastgaragedoors.com.au
East Coast Garage Doors Pty Ltd,
BSA LIC # 1120991
ABN 37 792 942 498
P: (07) 5476 9227
F: (07) 5476 9208

Advertisement

loading

Summary of Contents for EAST COAST MERLIN BLUE BUTTON

  • Page 1 East Coast Garage Doors Pty Ltd, ATF The East Coast Trust trading as EAST COAST GARAGE DOORS & GATES “Transform Your Entrance” BSA LIC # 1120991 ABN 37 792 942 498 P.O. Box 8125 MAROOCHYDORE DC QLD 4558 www. eastcoastgaragedoors.com.au...
  • Page 2 C945 (BEAR CLAW), C940 & C945 & E945M HANDSETS (433MHz) (diagram 3 overleaf): TO CODE YOUR NEW REMOTE USING THE MOTOR PANEL: Identify the ‘LEARN’ button located on the CONTROL PANEL of the MOTOR (refer diagram 3 overleaf) 2. Press and HOLD the desired remote push button that you wish to open the door. 3.

This manual is also suitable for:

Green buttonGreen button miniC945C940C943E945m